Stiebel Eltron
Multiple variants
Warm water heat pump - WWK electronic
Only a few items left in stock
- No heat exchanger for monovalent operation
- Compact series for recirculating air operation
- Hygienic hot water temperatures up to 65°C achievable in efficient heat pump operation
Multiple variants
Hot water tank pressure-resistant SHW S
Currently not in stock
- For centralised supply of entire residential buildings
- Stepless temperature adjustment
- Inner tank made from enamelled sheet steel
Multiple variants
Hot water heat pump, WWK-I electronic Plus
Delivery item
- Enamelled Hot water tank
- Compact series for recirculation operation
- Hygienic hot water temperatures of up to 65°C possible in efficient heat pump operation
Multiple variants
Hot water tank SHZ LCD, wall-hung
Only a few items left in stock
- For one or more tapping points
- Safety valves must be used for pressurised connection (closed)
- For single-circuit and dual-circuit operation
Multiple variants
Hot water tank pressure-resistant HFA
Only a few items left in stock
- For one or more tapping points
- Safety valves must be used for pressurised connection (closed)
- For single-circuit and dual-circuit operation
Multiple variants
Hot water heat pump, WWK-I 300 W Plus electronic
Delivery item
- Enamelled Hot water tank
- Compact series for recirculation operation
- Hygienic hot water temperatures of up to 65°C possible in efficient heat pump operation
Multiple variants
Stiebel Eltron small cylinder, SNO Plus
Only a few items left in stock
- Only for one tapping point
- Top table mounting
- Temperature adjustment by means of rotary switch
Multiple variants
DCE 11/13 compact instantaneous water heater, 3-phase, electronically controlled
Immediately available
- For one tapping point
- Electronically controlled
- Particularly flat design
- Infinitely variable temperature setting via rotary selector
- Suitable for preheated water from solar and heat pump systems
- Selectable connected load 11 or 13.5 kW
- Incl. mains connection cable
- Electronically controlled
- Particularly flat design
- Infinitely variable temperature setting via rotary selector
- Suitable for preheated water from solar and heat pump systems
- Selectable connected load 11 or 13.5 kW
- Incl. mains connection cable
Technical data:
| Type |
| DCE 11/13 |
| DCE 11/13 H |
| Energy efficiency class |
| A |
| A |
| Voltage [V] |
| 400 |
| 400 |
| Nominal power [kW] |
| 11.2 / 13.5 |
| 11.2 / 13.5 |
| Protection class |
| IP24 |
| IP24 |
| Temperature selection range [°C] |
| 20 - 60 |
| 20 - 60 |
| Water connections (screw connections) |
| DN 10 (3/8") AG |
| DN 15 (1/2") AG |
| Hot water output |
| 3.7 / 4.5 |
| 3.7 / 4.5 |
| Dimensions (W x H x D) [mm] |
| 188 x 293 x 85 |
| 188 x 293 x 85 |
Multiple variants
Mini instantaneous water heater DNM, hydraulically controlled, depressurised
Immediately available
- For one tapping point
- Hydraulically controlled
- Over- and under-counter installation possible with one device
- Operation with depressurised fitting
- Integrated flow rate regulator
- Hydraulically controlled
- Over- and under-counter installation possible with one device
- Operation with depressurised fitting
- Integrated flow rate regulator
Technical data:
| Type |
| DNM 3 |
| DNM 4 |
| DNM 6 |
| Energy efficiency class |
| A |
| A |
| A |
| Voltage [V AC] |
| 230 |
| 230 |
| 230 |
| Nominal power [kW] |
| 3.53 |
| 4.4 |
| 5.7 |
| Humidity level according to VDE |
| IP25 |
| IP25 |
| IP25 |
| Water connections (screw connections) |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] |
| 2.0 |
| 2.5 |
| 3.2 |
| Dimensions (W x H x D) [mm] |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
Multiple variants
DHM mini instantaneous water heater, hydraulically controlled, pressure-resistant
Immediately available
- For one tapping point
- Hydraulically controlled
- Under-sink mounting
- Operation with pressure-resistant or depressurised fittings possible
- Integrated flow rate regulator
- Hydraulically controlled
- Under-sink mounting
- Operation with pressure-resistant or depressurised fittings possible
- Integrated flow rate regulator
Technical data:
| Type |
| DHM 3 |
| DHM 4 |
| DHM 6 |
| DHM 7 |
| Energy efficiency class |
| A |
| A |
| A |
| A |
| Voltage [V AC] |
| 230 |
| 230 |
| 230 |
| 400 |
| Nominal power [kW] |
| 3.53 |
| 4.4 |
| 5.7 |
| 6.5 |
| Humidity level according to VDE |
| IP25 |
| IP25 |
| IP25 |
| IP25 |
| Water connections (screw connections) |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] |
| 2.0 |
| 2.5 |
| 3.2 |
| 3.7 |
| Dimensions (W x H x D) [mm] |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
Multiple variants
DEM mini instantaneous water heater, electronically controlled
Immediately available
- For one tapping point
- Electronically controlled
- Over- and under-counter installation possible with one device
- Can be operated with pressure-resistant or depressurised fittings
- Child safety lock and scalding protection thanks to permanently adjustable internal temperature
- Integrated flow rate regulator
- Electronically controlled
- Over- and under-counter installation possible with one device
- Can be operated with pressure-resistant or depressurised fittings
- Child safety lock and scalding protection thanks to permanently adjustable internal temperature
- Integrated flow rate regulator
Technical data:
| Type |
| DEM 3 |
| DEM 4 |
| DEM 6 |
| DEM 7 |
| Energy efficiency class |
| A |
| A |
| A |
| A |
| Voltage [V AC] |
| 230 |
| 230 |
| 230 |
| 400 |
| Nominal power [kW] |
| 3.53 |
| 4.4 |
| 5.7 |
| 6.5 |
| Humidity level according to VDE |
| IP25 |
| IP25 |
| IP25 |
| IP25 |
| Temperature selection range [°C] |
| 30 - 50 |
| 30 - 50 |
| 30 - 50 |
| 30 - 50 |
| Water connections (screw connections) |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] |
| 2.0 |
| 2.5 |
| 3.2 |
| 3.7 |
| Dimensions (W x H x D) [mm] |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
| 190 x 143 x 82 |
Multiple variants
SHD flow accumulator, pressure-resistant
Only a few items left in stock
- For one or more tapping points
- Safety valves must be used for pressurised connection (closed)
- Automatically switches to "continuous operation" after all the heated water has been drawn off
Multiple variants
Integral memory HSBC
Delivery item
- Combination appliance consisting of domestic hot water cylinder with a heat exchanger and Buffer tank
- System storage tank for integration in externally installed Heat pumps for domestic hot water preparation and space heating
- Additional corrosion protection through magnesium signal anode
Multiple variants
Pump assembly HSBC-HKM
Delivery item
- For adding a mixed heating circuit to an integral cylinder
- Consisting of:
- 1 x heating circuit pump
- 1 x 3-way Mixers
- 1 x Mixer motors
- 1 x insulated copper pipework 22 mm
Multiple variants
Hot water tank pressure-resistant SH S electronic
Currently not in stock
- For one or more tapping points
- For pressurised connection (closed), always use a Safety valve
- For single-circuit and dual-circuit operation
Multiple variants
Buffer tank SBP
Immediately available
- Buffer cylinder for heat pump heating systems
- For hydraulic decoupling of heat pump and heating circuit
- Foam-insulated steel cylinder
Multiple variants
Hot water tank SBB WP SOL
Delivery item
- DHW cylinder with two heat exchangers for heat pump operation and additional connection for a solar thermal system
- Direct-foamed enamelled steel tank
- With magnesium signal anode
Multiple variants
DEL Plus comfort instantaneous water heater, electronically controlled
Only a few items left in stock
- For one or more tapping points
- Electronically controlled
- For over-counter and under-counter installation
- Illuminated multifunctional display
- Greater operating convenience for under-sink installation, as the appliance cap and control unit can be rotated
- The temperature can be permanently limited internally by the installer to 55, 50 or 43 °C
- Quick temperature selection thanks to two memory buttons
- Suitable for preheated water up to 55°C for reheating
- Selectable appliance output - 18/21/24 kW in one appliance (not DEL 27 plus)
- Comfort remote control is available as an accessory
- Electronically controlled
- For over-counter and under-counter installation
- Illuminated multifunctional display
- Greater operating convenience for under-sink installation, as the appliance cap and control unit can be rotated
- The temperature can be permanently limited internally by the installer to 55, 50 or 43 °C
- Quick temperature selection thanks to two memory buttons
- Suitable for preheated water up to 55°C for reheating
- Selectable appliance output - 18/21/24 kW in one appliance (not DEL 27 plus)
- Comfort remote control is available as an accessory
Technical data:
| Type |
| DEL 18/21/24 Plus |
| DEL 27 Plus |
Energy efficiency class |
| A |
| A |
Voltage [V] |
| 400 |
| 400 |
Nominal power [kW] |
| 18 / 21 / 24 |
| 27 |
Type of protection |
| IP25 |
| IP25 |
Temperature selection range [°C] |
| 20 - 60 |
| 20 - 60 |
Water connections (screw connections) |
| DN 15 (1/2") AG |
| DN 15 (1/2") AG |
Hot water output at Δt = 28 K [l/min] |
| 9.2 / 10.7 / 12.3 |
| 13.8 |
Dimensions (W x H x D) [mm] |
| 225 x 466 x 116 |
| 225 x 466 x 116 |
Multiple variants
Air-to-water heat pump WPL ACS classic compact Set 1.1
Delivery item
- - Inverter technology for high efficiency and low energy costs
- Low noise levels thanks to intelligent appliance design
- Operating noise can be further reduced in night mode ("Silent Mode" function)
- Cooling function possible via Surface heating system and fan coil units
- Operation with R410A refrigerant
- Flow temperature of up to 60 °C for high hot water comfort - Domestic hot water cylinder that contains all the important hydraulic components
- Compact, system-safe and energy-saving for use in single-family homes
Multiple variants
SH SL above-table storage tank, pressure-resistant
Only a few items left in stock
- For one or more tapping points
- For pressurised connection (closed), always use a Safety valve
- For single-circuit and dual-circuit operation
Multiple variants
Air-water/heat pump - WPL A
Immediately available
- Outdoor air-to-water heat pump for heating
- Suitable for refurbishing old buildings
- Inverter technology for high efficiency and low energy costs
Multiple variants
DDLE Easy electronic instantaneous water heater
Immediately available
- For one or more tapping points
- Electronic instantaneous water heater with good temperature comfort
- Largely constant outflow temperatures in the event of pressure fluctuations or supply temperature fluctuations
Multiple variants
Air-to-water heat pump WPL-A HK 230 Premium
Delivery item
- Externally installed air-to-water heat pump for heating and cooling
- Excellently suited for new buildings and modernisation
- Inverter technology for high efficiency and low energy costs
- Low noise emission due to intelligent unit design
- Operating noise can be further reduced in night mode ("Silent Mode" function)
- Highest energy efficiency even when used with radiators
- Can be optionally integrated into the home network and controlled via smartphone (additional components required)
- Flow temperature of up to 75°C for first-class hot water comfort
- Operation with refrigerant R454 C
- Excellently suited for new buildings and modernisation
- Inverter technology for high efficiency and low energy costs
- Low noise emission due to intelligent unit design
- Operating noise can be further reduced in night mode ("Silent Mode" function)
- Highest energy efficiency even when used with radiators
- Can be optionally integrated into the home network and controlled via smartphone (additional components required)
- Flow temperature of up to 75°C for first-class hot water comfort
- Operation with refrigerant R454 C
| type |
| WPL-A HK 230 Premium |
| 05 |
| 07 |
| EEK Space heating low temperature |
| A+++ to G |
| A+++ |
| A+++ |
| EEK Space heating medium temperature |
| A+++ to G |
| A+++ |
| A+++ |
| Heating capacity /COP according to EN 14511 |
| - at A2/W35 rated power |
| [kW/-] |
| 3.19 / 4.60 |
| 4.30 / 4.30 |
| - at A7/W35 rated power |
| [kW/-] |
| 3.31 / 5.42 |
| 3.31 / 5.42 |
| - at A-7/W35 rated power |
| [kW/-] |
| 4.97 / 3.45 |
| 6.87 / 2.93 |
| Cooling capacity / EER according to EN14511 |
| - at A35/W18 rated power |
| [kW/-] |
| 3.37 / 4.35 |
| 4.94 / 4.28 |
| - at A35/W7 rated power |
| [kW/-] |
| 4.73 / 2.86 |
| 7.30 / 2.35 |
| Dimensions (W x H x D) |
| [mm] |
| 1270 x 900 x 593 |
| 1270 x 900 x 593 |
| Weight |
| [kg] |
| 135 |
| 135 |
| Ref.no. |
| 202669 |
| 200123 |
Multiple variants
WPL-A HK 400 Premium air-to-water heat pump, monobloc
Immediately available
- For Heaters and coolers
- Inverter technology for high efficiency and low energy costs
- Quiet operation thanks to the encapsulated cooling circuit and infinitely variable fan speed
