Testboy®
- Protection type: IP44
- For detecting wire faults
- Combination of CEE plug and earthed socket with self-closing cover
- Protection type: IP44
- For detecting wire faults
- Combination of CEE plug and earthed socket with self-closing cover
- Protection class: -
- Display: LCD
- Display range: 1999
- Protection class: IP40
- LED Torches with On/Off switch: Yes
- Detection: Red LED and buzzer
- Protection class: IP30
- Display: LCD
- Display range: 4 digits
- Protection class: IP30
- Display: LCD
- Display range: 6600
- For locating cables in the wall and Ducts and twisted pairs in telecommunications and network technology
- Display/sound: Continuous or pulsating sound
- LED Torches
- Protection class: IP65
- Display: LED
- Voltage range AC: 3 V - 1000 V
- Specification: Locating cables and conduits in the ground and twisted pairs in telecommunications and network technology
- Display/sound: Optical and acoustic
- LED Torches: No
- Protection type: IP20
- Display: LED
- Voltage range AC: 6 V - 690 V
- Protection class: IP65
- Display: optical, LCD
- Voltage range AC: 3 V - 1000 V
- Adapter for testing various measured values of a consumer via current clamp meter
- Schuko adapter plug and coupling
- Simple load current measurement
- Measuring medium: Air / surface / Humidity
- Emission factor: 0.75 / 0.85 / 0.95 fixed
- Measuring range: Surface: -20 to +350 °C
Air: -10 to +40 °C
Humidity: 10 to 90 %
- All-rounder with voltage measurement up to 1500 V, especially for photovoltaic systems
- Display: LCD, illuminated
- Voltage range AC: 1 - 1000 V
- Simulates an electric vehicle and enables safe function tests and safety checks on EV charging stations before commissioning
- Suitable for wallboxes with and without cables
- Connection option for installation tester or Multimeters
- Application: Testing the insulation resistance of devices, electrical systems, circuits
- Display: LCD with bar graph display
- Test with 4 selectable test voltages:
- 250V DC: 0-250MΩ
- 500V DC: 0-500MΩ
- 1000V DC: 0-1000MΩ
- 2500V DC: 0-2500MΩ
- Indicates the presence of all three phases by means of its five glow lamps and determines the direction of the rotating field by means of the correct sequence of the phases, e.g. for Three-phase current Circulation pumps
- IEC/EN 61010-1 (DIN VDE 0411)
- Voltage range: 60-00 V/AC
- Detection of live cables, metals and wooden structures
- Display: LCD, acoustically and optically illuminated with traffic light indicator
- Automatic calibration
- Direct-reading
- For inspection in 230 volt systems, sockets, connection cables in domestic and site power supply systems
Fi test with viable nominal current - Nominal fault current: 10 to 500 mA
- Application: For electrical engineering, industry, Photovoltaics
- Testing of electrical systems in accordance with VDE 0100/600 and EN 61557
- All measuring functions can be selected directly via rotary switch
- Protection class: IP54
- Display: LED
- Voltage range AC: 12 - 690 V
- Tests the water content in the brake fluid
- TÜV / GS-tested
- The quality is indicated by 5 LEDs on the pen-shaped device
- Testing of RJ45, RJ11, USB and BNC cables, IEEE1394
- Testing the insulation resistance of devices, electrical systems and circuits
- Display: LCD illuminated
- Display: LCD illuminated
- Display range: 1999
- Voltage range AC: 1 mV - 600 V