theben®
- Twilight switch with integrated weekly timer
- External light sensor included in the scope of delivery
- 1 Ducts
- Function:
Room temperature controller with thermal feedback for mounting in flush-mounted boxes. Ideal controller for modernisation and new builds, because it can be easily integrated and fits seamlessly into the housing environment. - Setting range +5 °C to +30 °C
- Under the setting knob, the temperature range can be limited
- theben-timer 26 IP 20
- Daytime program can be programmed with 15 min segments
- Switching disk: 24 h
- Room thermostat with thermal feedback, suitable for all types of heating, e.g. gas, water, electric heating with central / single room control.
- Setting regulator +5 °C to +30 °C with mechanical adjustment or setting
- RAM 708 also suitable for air-conditioning systems
RAM 702 RAMSES ®
- Stair light time switch, electromechanical
- 3-wire connection system and floor lighting, but without follow-up switching (no longer permitted for new installations)
- No quiescent current consumption
- Motion detector (PIR)
- Automatic lighting control depending on presence and brightness
- For outdoor use
- Passive infrared motion detector for Wall mounting in flush-mounted box
- Rectangular detection area
- 1 Ducts light
- Protection type IP 65
- Motion detector (PIR)
- Automatic lighting control depending on presence and brightness
- For outdoor areas
- Protection Type: IP 20 according to EN 60529
- Protection class: II according to EN 60 730-1 subject to correct installation
- 24-hour switching disk with segments that each have 15 min. switching duration
- For transmitting timer switch programs and direct commands from the app to the top3 timer switch
- Can also be used as a memory card for all top2 devices in network operation
- Built-in memory function (EEPROM); memory function can also be used in the PC programming set
- Motion detector (PIR)
- Automatic motion and brightness-dependent control for Lighting
- Ceiling mounting, flush-mounted or recessed ceiling with removable clamps
- Clock thermostats in a flat design for time-dependent monitoring and control of the room temperature. Easy adjustment of the energy-saving night reduction on the program disc.
Suitable for oil or gas heaters.
The clock thermostat controls, for example, a circulating pump, a thermal actuator, a solenoid valve, a motor controller or the guest thermometer directly with a relay contact.
Plug connectors or segments allow lowering several times a day.
Wall mounting.
RAMSES® 722
Clock thermostats for time-dependent monitoring and control of the room temperature. - Electronic temperature control
- Operating point and electronic feedback adjustable from the front
- Twilight switch/light control unit
- External light sensor included in the scope of delivery
- 1 Ducts
- Stair light time switch, electronic
- Zero-crossing circuit to protect the Relay contact and illuminant, i.e. the service life of the illuminant is extended
- Multifunctional device with 10 selectable functions, adjustable on the front of the device
- 2 channel
- Stand-by power: 1.1 W
- Switching capacity at 250 V AC, cosPHI = 1: 6 A
- 1 duct
- Stand-by power: 0.9 W
- Switching capacity at 250 V AC, cosPHI = 1: 16 A
- Protection class: IP55
- Operating voltage: 230 V/AC
- Sensitivity range: 2 - 200 lux
- Automatic
- Presence simulation
- Twilight switch
- Temperature sensor for floor laying
- Teach-in function for teaching the current brightness value
- Pre-set brightness settings and switch-on times
- Buttons for pulse and test function, twilight mode and product reset
- Stair light time switch, electromechanical
- 4-wire with connection for floor lighting
- 3-wire connection without floor lighting (no longer permitted for new installations)