Vexve
Multiple variants
Replacement thermostat insert
Immediately available
- Suitable for charging valve ALV and TERMO 15-50 Termovar brass/AF, Thermokit LK 820/ACG
- Scope of delivery:
- Cover gaskets
Multiple variants
Thermal loading valve model ALV
Immediately available
- Mixing valve for return flow boost with internal thread connections. In the case of hot water boilers, the automatic loading valve is built-in with or without buffer storage and works without external energy. It is used to maintain the return flow temperature. Due to an optimal boiler return temperature, falling below dew point and boiler sooting is prevented, which means that there is less environmental pollution and the service life of the boiler is extended. Using these loading valves, stratification in buffer storage can also be improved.
- Thermocouple can be turned in the direction of work under pressure and without tools
Technical data: - Max. operating temperature: 120°C
Multiple variants
3-way mixer TERMOMIX model D (grey cast iron)
Immediately available
- Operating temperature max.: 110°C
- Max. operating pressure: 10 bar
- Angle of rotation: 90°
90 860 11
AM 40 heating controller for one heating circuit, controller, motor, VF, AF, power supply unit
Immediately available
- To control: 1x mixed heating circuit (3 point PI controller)
- Can be expanded
- Weather-compensated, suitable for radiator, underfloor and constant temperature heating systems
Multiple variants
Loading valve unit model ACGE, motorised
Immediately available
- Pre-assembled valve unit for solid fuel buffer storage systems to maintain the boiler return temperature. Due to optimal boiler return temperature, falling below dew point and boiler sooting is prevented, which means that there is less environmental pollution and the service life of the boiler is extended. Using the loading valve unit, stratification in buffer storage can also be improved.
Technical data: - Operating voltage: 230 V / AC, 50 Hz
- Max. flow rate: 2600 L/h
Multiple variants
4-way mixer TERMOMIX model C (grey cast iron)
Immediately available
- Operating temperature max.: 110°C
- Max. operating pressure: 10 bar
- Angle of rotation: 90°
Multiple variants
Loading valve unit model ACG, thermal
Immediately available
- Pre-assembled valve unit for solid fuel buffer storage systems to maintain the boiler return temperature. Due to optimal boiler return temperature, falling below dew point and boiler sooting is prevented, which means that there is less environmental pollution and the service life of the boiler is extended. Using the loading valve unit, stratification in buffer storage can also be improved.
Technical data: - Operating voltage: 230 V / AC, 50 Hz
- Max. flow rate: 2600 L/h
Multiple variants
Replacement thermostat insert Termo, ALV, Termovar
Immediately available
- Suitable for charging valve ALV and TERMO 15-50 Termovar AF
- Scope of delivery:
- Cover gaskets - Suitable for Termo charge valve
90 044 56
Replacement pump head Grundfos UPMO-60 for loading valve unit grey cast iron, old
Immediately available
- Suitable for LK 810 eco charge valve, thermokit, Termovar grey cast iron
90 041 77
Thermostatic switch with spring for LVE Termovar Mes.
Immediately available
- Suitable for charge valve unit TERMOVAR brass
Multiple variants
Solid fuel loading set model Termovar, thermal
Immediately available
- Technical data:
- Operating voltage: 230V/AC, 50 Hz
- Boiler output max.: 100 kW
90 513 46
Termobac DB 40 Double-acting backflow preventer, cylindrical internal thread 11/2
Immediately available
- Double-acting backflow preventer
- Connections: DN40 (1½”) internal thread
90 511 35
Seal set for brass mixer WS-TERMO MIX DS and TERMO MIX H 1/2" - 1 1/4""
Immediately available
- Suitable for grey cast iron mixer TERMOMIX model H, DN 15 (1/2") - DN 32 (1 1/4")
90 885 37
Mixing valve DN40, KVS 15,G 11/2" suitable for charge valve unit ACGE
Only a few items left in stock
- Suitable for loading valve unit ACGE
90 511 36
Compression fitting, brass sleeve coupling 28x11/4"
Immediately available
- Suitable for Termomix cast iron DN 20-50 (3- and 4-way)
90 860 13
AM 40 motor package 2 Extension for second heating circuit, motor + VF 3 metres
Immediately available
- Drive mixer 24 V AC with 1.5 m cable and quick connection
- Contact sensor with 3 m cable and quick connection
- Mounting set
90 041 74
Kugelventil RP 11/2" x 11/4" für LVE Termovar Mes.
Immediately available
- Suitable for charge valve unit TERMOVAR brass
Multiple variants
Thermostat
Immediately available
- Suitable for Termovar AF/ADV changeover valves, LK 821
- Scope of delivery:
- Seal sets
- Screws
Multiple variants
Thermostat insert for THERMOMAT 1
Immediately available
- Suitable for TERMOMAT 1 / valve set
Multiple variants
• Suitable for charge valve unit TERMOVAR brass
Immediately available
- Suitable for charge valve unit TERMOVAR brass
Multiple variants
Thermostat insert
Immediately available
- Suitable for charge valve LK 823
90 885 38
Seal set suitable for AMV 3 and 4-way mixers DN15-DN32
Immediately available
- Suitable for mixer AMV 3 / 4, old and new design
- DN 15 (1/2") - DN32 (1 1/4")
90 041 72
Kugelventil RP 11/2" x 28mm für LVE Termovar Mes.
Currently not in stock
- Suitable for charge valve unit TERMOVAR brass
90 860 12
AM 40 room unit (wireless) package A for the primary heating circuit Wireless room unit and transmitter
Immediately available
- Wireless room unit
- 3 units of AA alkali batteries included
- Antenna unit for central unit AM40 with 1.5 m cable