Wera

• Consisting of:
  
• Slotted screwdriver with impact cap, full-length hexagonal blade and hexagonal spanner aid: SL7.0 x 1.2 x 125 mm
  
• Stubby slotted screwdriver: SL5.5 x 1.0 x 25 mm
  

• 1/4" Cyclops Speed Ratchets, 152 mm
  
• 1/4" Socket wrench inserts, hexagon socket: SW 5.5/6/7/8/10/11/12/13, 23 mm
  
• 1/4" Extension with quick-release sleeve, short: 75 mm
  

• 1/4" torque spanner, reversible, 2.5-25 Nm, 290 mm
  
• 1/4" Socket wrench inserts, hexagon socket: 6/7/8/10/12/13, 23 mm
  
• 1/4" extension with quick-release sleeve, short: 75 mm
  

• 1/4" Cyclops Speed Ratchets, 152 mm
  
• 1/4" Socket wrench inserts, external hexagon: SW 7/10/13, 23 mm
  
• 1/4" Bits Phillips: PH1/PH2, 89 mm
  

- SL, length (mm): 3.0 x 0.5, 70- Voltage (V): 150-250- Handle with sturdy clip- Hexagonal roll-off protection against annoying rolling away ...

- Torque spanner for interchangeable insert tools 14 x 18 mm- Main scale (Nm): 10-100- Main scale range (Nm): 0.5- Accuracy: ± 4 % of the set value- Total length (mm): 395- For right-hand and left-hand tightening- Audible and tactile release mechanism- Self-adjusting open-ended spanner 14 x 18 mm: ...

• In 2go tool container
  
• With 2go carrying strap and 2go quiver
  Consisting of:
  Wera:
  
• Flat-blade screwdriver with impact cap, hexagonal blade, length (mm): 1.2 x 0.7, 125
  

• For screwing, chiselling and prying
  
• Slotted: 3.5 x 80, 4.5 x 90, 5.5 x 100, 7.0 x 125 mm
  
• Phillips: PH 1 x 80, PH2 x 100 mm
  

• With hook-and-loop zone for docking to the 2go system
  
• Dimensions (mm): 325 x 130 x 80
  
• Contents not included
  2go tool bag - mobile, flexible, individual
  

• With strong permanent magnet

- Hexagonal ball head on the long leg- SW (mm): 1.5/2/2.5/3/4/5/6/8/10 ...

- Insulated VDE blades according to IEC 60900 for safe working up to 1000 V- SL, length (mm): 2.5 x 0.4, 80/3.5 x 0.6, 100/4.0 x 0.8, 100/5.5 x 1.0, 125- PH, length (mm):PH1, 80/PH2, 100- Hexagonal roll-off protection against annoying rolling away- Lasertip® blade: Clamps into the screw head and pr ...

• Torx®: T10/T15/T20/T25/T30/T40, 50 mm

• Tool-Check Modular: Enables flexible, customised combinations of different elements
  
• Interchangeable and expandable thanks to adapters and Hinges
  Consisting of:
  Tool-Check Modular Imperial 1, imperial, 21-piece:
  
• 1/4" Bits hand holder, magnetic, length (mm): 78
  

• Fine serration for a small ratcheting angle; switching ring (right, fixed, left)
  
• The ratchet heat can be swivelled in any direction, and can be locked in any position via the slider switch, which is attached on both sides
  
• The ratchet can be used as a conventional screwdriver in the 0° position with an adapter and bit
  

- Hexagonal ball head on the long leg- SW (mm): 1.5/2/2.5/3/4/5/6/8/10 ...

• Hex socket wrench insert: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13
  
• Reversible ratchet 1/4"
  
• Extensions 56, 150 mm
  

• Drilling, thread cutting, deburring
  
• 1/4” hex

• Torx®: 3xT10/5xT15/8xT20/7xT25/4xT30/2xT40, 25 mm

• VDE interchangeable blade holder, hexagonal holder x length (mm): 9 x 98
  
• SL, length (mm): 2.5 x 0.4*/3.5 x 0.6/4.0 x 0.8/5.5 x 1.0, 157
  
• SL (single-pole Voltage testers), length (mm): 3.0 x 0.5, 70
  

• Tool-Check Modular: Enables flexible, customised combinations of different elements
  
• Can be replaced and extended using adapters
  Consisting of:
  
• 1/4" Bits hand holder, magnetic, length (mm): 78
  

• - Diamond-coated tip with bi-torsion zone
  - The more elastic BiTorsion zone absorbs high loads: twisting of the bit tip is avoided. In combination with a BiTorsion bit holder, two torsion zones are created to cushion high and low load peaks.
  
• Profile and size of the bits are easy to identify due to the Wera® “Take it easy” tool finder system with its colour coding and easily visible lettering
  
• Colour-coding only up to T30

• Not switchable
  
• Straight
  
• Holding function due to metal plate