WESTEX
- For all plaster and stucco work
- Easy and straight tearing with transverse scoring
- Tape material: PVC
- For almost all substrates
- Impregnated and therefore strong when wet, no bleeding
- Very flat and sharp paint edges
- Material: polyamide
- For Hanger ø: 6 mm
- Especially suitable for:
- Dispersion paints wet class 1+2 and 3-4
- Coloured dispersions
- Latex paints
- For very flat paint edges indoors and outdoors
- Tapes material: impregnated rice paper
- Type of adhesive: acrylate
- For smooth to slightly textured surfaces
- Consisting of:
- 1 x large surface roller Vestan 180 mm, pile depth 12 mm
- 1 x large surface roller Vestan 250 mm, pile depth 12 mm
- 1 x handle 180 mm
- 1 x handle 250 mm
- 1 x plastic wipe-off grid 270 x 290 mm - Especially suitable for:
- Dispersion paints in Wet Abrasion Class 3+4
- Wall paints
- For coatings garages, floors with viscous materials
- High coverage
- Material: polyamide continuous fibre
- For unrolling appropriate masking paper (width up to max. 300 mm) and adhesive tape
- Supplied without tear-off blade
- With fixed mounted standard cone
- For lightly structured surfaces
- Roll material: polyester
- Hanger ø: 8 mm
- Material:
- Handle: unvarnished hardwood
- Trimming: pure synthetic bristle
- Ferrule: sheet metal, rust-resistant - Especially suitable for:
- Water-based paints
- 2K coatings
- Solvent-based paints
- Liquid plastic
- Wood oils
Very stable bristles with Fine tips for a very fine surface finish, especially for quick-drying water-based paints with very short drying times. Optimum colour exchange, easy to clean.
- Material:
- Handle: softwood unvarnished
- Trimming: pure synthetic bristle
- Ferrule: sheet metal, rust-resistant - Especially suitable for:
- Wall paints, dispersions
- Reaction paints
- Solvent-based paints
- Greases and Oils - For work in difficult areas such as edges, corners, wall finishes and recesses
- Bristles: 70% tops
- Very high colour retention and material distribution
- Ideal for solvent-based paints
- Material:
- Handle: Softwood unvarnished
- Trimming: bristle mixture of twice-cooked natural bristle and synthetic bristle
- Ferrule: Sheet metal, rust-resistant - Especially suitable for:
- Wall paints, dispersions
- Rust protection lacquers
- Solvent-based paints
- Epoxy resins
- 2K Coatings
Bristle remains inherently stable even with tough materials. Good colour exchange.
- High coating thickness with first application
- Especially for applying solvent-based and viscous lacquers
- Very fine surface finish and even colour transfer
- For rough substrates, straight taping for floor coatings, joints, plaster finishes and formwork
- High mechanical load
- Tape material: PE-coated
- Can be combined with telescopic pole (80 828 30, 80 851 00 + 01)
- 2-component handle/plastic for optimum hand control and low-fatigue work
- Material:
- Handle: unvarnished hardwood
- Trimming: pure synthetic bristle
- Ferrule: Aluminium - Especially suitable for:
- Wall paints
- Reaction paints
- wood preservation
- Adhesives
- Water-based paints - For line work and for finishing contours
- Material:
- Handle: softwood unvarnished
- Trimming: pure synthetic bristle
- Ferrule: sheet metal, rust-resistant - Especially suitable for:
- Wall paints
- Reaction paints
- Solvent-based paints
- Greases and Oils
- Wood preservation - For work in difficult areas such as edges, corners, wall ends and recesses
- For very rough and porous substrates with poor adhesion such as concrete, plaster, clinker and brickwork
- Not suitable for natural stone
- Very high mechanical load
- Excellent colour absorption and colour release for highest m2 performance
- No felting, very easy to wash
- Colour is easy to work into deeper structures
- Very high colour retention and material distribution
- Bristles: 60% tops
- For simple renovation work and industrial applications
- Premium quality
- Bristles: 70% tops
- Stable bristles with fine tip for fine surface finish
- Premium quality
- Bristles: 90% tops
- For coating large surfaces
- Optimum unwinding properties with corrugated grid structure
- With bending strip for fixing to the paint bucket