zehnder
- Suitable for washing machines, showers, sinks, dishwashers, bidets, urinals, bathtubs
- Ready to plug in
- Switch integrated in the tank cover with acoustic alarm if the water level is too high
- Draws in water from 1 cm, absorbs to “wipe-dry” level
- For cellars, washhouses, pools, manholes and anywhere that requires “complete” water pumping
- Pump housing: plastic
- For pumping clear and dirty water from pits and cellar drainage
- Pump housing: plastic
- Lever float, can be locked for continuous operation
- Model for flat suction pump FSP 330
- Model as universal level control with high water alarm, also for other pumps up to 1000W or can be used as a dry run protection.
With universal angle bracket and 30mm electrodes. - Nominal power: 1000 W, 230 V~
- Suction pressure connection: DN 25 (1”) internal thread
- Voltage 230 V / 50 Hz
- Max. medium temperature: 40 °C
- For pre-wall installation or direct connection
- Suitable for WCs, washbasins, showers or bidets
- Ready to plug in
- Suitable for water softening systems and condensing boilers,
shower, washbasin and washing machine can also be connected - Ready to plug in
- For conveying lightly acidic condensate, abrasive or saline media (max. 15% salt content)
- Delivery contents:
- Stainless steel pump E-ZW 65 A (93 092 96) with integrated check valve
- Float with float joint and fastening clip to fix the pump in the box
- 10 m cable and 15 m C-hose with Storz coupling
- Pinch and kink protection for the hose
-The pump can easily be taken out of the box and used either in the box or outside it
Technical data: - Rated power: 850 W
- Voltage: 230 V, 50 Hz
- One-level
- Pump housing: stainless steel
- Also for fixed installation, e.g. as drainage water pump, can be fitted in pipes with inner ø from 300 mm
- For construction site drainage and groundwater management
- Pump housing: stainless steel
- With float switch for automatic on / off operation
- Single-unit design:
- Polyethylene collection tank
- Kompaktboy with 55 l capacity and adjustable switching volume of 19 l to 45 l, depending on the inlet connections used
High-performance vortex impeller pump with considerably reduced running noise, three-phase current or alternating current
- Pump housing: stainless steel
- Multi-level
- For pumping from depths exceeding 8.5 m
- With free cable end
- With VDE approval
- Absolute tightness through complete overmoulding of the float and cable entry
- For cisterns with floating drainage, irrigation of house and garden, water from rainwater cisterns
- Pump housing: stainless steel
- Voltage: 230 V, 50 Hz
- Disposal of wastewater from single-family homes or apartment blocks
- Drainage below the backflow level, pressure drainage
- Industry
Design:
- Suitable for Zehnder: Lifting system SWH 100-190
- Intelligent moisture sensor based on a wireless solution
- If a water leak is detected, the device activates the Wi-Fi connection to the router and sends an alarm signal to your mobile phone or tablet via a corresponding app (Android/IOS)
- Battery operation: 2 x AAA (not included)
- Suitable for Zehnder: SWH 100 lifting system
- Scope of delivery:
- M20 cable gland
- The electric single-stage submersible motor pumps with stainless steel housing have been specially
specially developed for pumping wastewater without faeces, particularly for emergency drainage and
drainage and sump emptying, even for fixed installations, e.g. as drainage water pumps - Submersible motor pump in shaft seal-less design with magnetic coupling between motor
and impeller, type: E-ZWM 65 A Magnet - Use in particular for:
- Type: E-ZWM 65A for continuous operation
- Circulation pumps
- Watercourse pump
- Drainage pump
- Injector pump
- Suction pressure connection: DN 25 (1”) internal thread
- Voltage: 230 V, 50 Hz
- Pump housing: plastic
- With float switch
- For transporting faecal-free wastewater, in particularly for emergency drainage and shaft drainage