Chemical products
New
Multiple variants
Sealant Die Fuge, mould-free on SMP basis, 300g cartridge
Immediately available
- 1-component sealant based on hybrid polymer SMP
- Mould-resistant (microorganisms DIN ISO 846)
- Very good primerless adhesion to numerous substrates, even when exposed to water
New
Multiple variants
Roof-mounted pipe penetration for solar pipes, double penetration
Immediately available
- Self-adhesive sleeve with weather-resistant surface for rainproof routing of pipes for solar thermal and photovoltaic systems.
- Self-adhesive butyl backing
- Permanently UV-stable
New
Multiple variants
Roof-mounted pipe penetration for solar pipes, single penetration
Immediately available
- Self-adhesive sleeve with weather-resistant surface for rainproof routing of pipes for solar thermal and photovoltaic systems.
- Self-adhesive butyl backing
- Permanently UV-stable
New
Multiple variants
Mould-STOP NR. 09
Immediately available
- Disinfects and removes mould, green and algae infestation from indoor and outdoor surfaces
- Suitable for floors in sanitary areas and on mineral substrates such as brick, concrete, plaster, facades and gravestones
- Not suitable for fabrics, metals and green plants as the product contains chlorine (risk of bleaching)
New
Multiple variants
Mould remediation solution NR. 17
Immediately available
- For the substrate treatment of mould, green and algae-infested surfaces before subsequent coats of paint. Can be used both indoors and outdoors
- Permanent destruction of residual spores in the substrate of mould, green and algae coatings
- Aqueous solution = penetrates deep into the substrate
New
Multiple variants
Graffiti Cleaner NR. 23
Immediately available
- Dissolves spray paints, colours and felt-tip pens, making them easy to remove
- Infiltrates all solvent-resistant substrates, such as metal, glass, wood, tiles, unpainted concrete, clinker, natural stone and artificial stone
- Short exposure time, biodegradable
New
Multiple variants
Leach NR. 01
Only a few items left in stock
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable by saponifying the surface. Also suitable for removing wax from wall surfaces.
- High roughening effect, therefore no sanding required!
- Mixing ratio: 100 g to 1 litre of water
New
Multiple variants
Leaching agent + degreaser NR. 34
Immediately available
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable through surface saponification. Particularly suitable for subsequent water-based Coatings & paint systems.
- Degreasing, high surface saponification
- High roughening effect, therefore no sanding required!
New
Multiple variants
Dispersion stain remover NR. 05
Immediately available
- Removes all paint stains, emulsion paints, Coatings and oil paints from all solvent-resistant surfaces such as masonry, wood, glass and textile floors, even if they are already completely dry. For plastic surfaces and painted surfaces, compatibility must be checked on an inconspicuous area.
- No solvent regeneration, therefore can also be used on Work clothing and textile floors.
- Application ratio: undiluted
New
Multiple variants
Wood bleaching powder OXYD NR. 06
Immediately available
- For lightening and removing discolouration from all types of wood. Old and blackened wood becomes like new again and regains its natural colour. Lye residues (e.g. from paint strippers etc.) can be neutralised with this product. Removes sweat marks in the sauna.
- Fungicidal (fungicidal) property
- Preparation ratio: Dissolve 100 g in 800-1000 ml (warm) water
New
Multiple variants
Cement residue remover + limescale remover NR. 15
Immediately available
- For Cleaning and removing limescale and cement residues, inorganic soiling and flash rust, also in combination with oily and greasy soiling. For Cleaning acid-resistant substrates such as wall and floor tiles, brick and clinker surfaces, porcelain stoneware in sanitary facilities, swimming pools, kitchens, car washes, clinker facades. Check compatibility when used on Bath fittings.
- Degreasing, strong protective solvent
- Application ratio: depending on soiling, dissolve 1:1 to 1:15 with water
New
Multiple variants
Saltpetre remover NR. 25
Immediately available
- Removes efflorescence (saltpetre etc.) on natural stone, clinker, brick, concrete and plaster. Covers acid-sensitive surfaces (e.g. marble, artificial stone)
- Application ratio: apply undiluted
- Consumption: 120-150 ml/m²
Remove loose layers and dry brush off heavy efflorescence. Spray onto the efflorescence or apply with a Sponges or ceiling brush. After a reaction time of 10-15 minutes, rinse with clear water.
New
Multiple variants
Wallpaper protection NR. 02
Immediately available
- As a solvent-free coating to protect all wallpapers, wall paints and natural stone. Only suitable for indoor use. Makes all wallpapers, emulsion paints etc. washable and scrub-resistant. Wallpaper protection dries matt. Breathability is slightly restricted.
- Matt gloss level, does not yellow (lightfast)
- Application ratio: undiluted
New
Multiple variants
Woodchip wallpaper stripper NR. 19
Immediately available
- Removes all woodchip wallpaper even without the use of a spiked roller, sandpaper, etc.
- Suitable for removing multi-coated wallpapers and wallpapers that are difficult to remove, such as textile and vinyl wallpapers
- Extremely high removal power, no run-off on the wallpaper
New
Multiple variants
Finishing paste + glaze remover NR. 03
Immediately available
- For removing old paints and coatings on solvent-resistant substrates such as wood, plaster surfaces, metals, concrete, etc. Also for removing glazes (especially thin-layer glazes). Can also be used for old coatings and special 2K Coatings.
- Short exposure time, no Covers required
- Pasty, therefore also easy to use on vertical surfaces
New
Multiple variants
Universal cleaner Profi NR. 14
Immediately available
- Biodegradable cleaning concentrate for all washable surfaces
- Cleans heavy and difficult to remove soiling of all kinds without etching and thus preserves the natural shine of the surface
- Removes all soiling and has a 100% degreasing effect
New
73 023 38
Colour additive highly concentrated NR. 10,100ml bottle
Immediately available
- Against mould and bacteria for 100% fungicidal (fungicidal) treatment of all water-dilutable paints, including Coatings, dispersions, facade paints, synthetic resin plasters, etc. and as a mould-preventative agent in wallpaper paste
- Suitable for food processing companies
- Fungicidal (fungicidal) property
New
73 023 53
Silicone grout remover NR. 29, 200 ml
Immediately available
- Preferred areas of application are bathrooms, kitchens, window (construction), tiles, expansion joints, etc. The silicone grout remover can be used to easily remove silicone grout residue from glass, ceramics, metals and numerous plastics such as plastic bathtubs and shower trays
- Pasty, therefore also easy to use on vertical surfaces
- Application ratio: undiluted
New
94 167 66
SILISTO® Film adhesive type F 310ml Cartridges
Immediately available
- Single-component adhesive sealant for bonding plastic films to create airtight connections
- Bonding of films/window joint tapes even on slightly damp, dusty and absorbent substrates
- Permanently elastic adhesive joint
New
94 167 67
SILISTO® spray primer 500ml
Immediately available
- Can be used as a universal spray adhesive for strong bonds and for pretreating self-adhesive materials
- Suitable for bonding various surfaces and materials, such as concrete and masonry, brick, plaster, wood, MDF and other wood panels, metal, polystyrene and plasterboard
- The primer offers excellent adhesion for: Butyl, bitumen, rubber, acrylic, on many surfaces, such as aerated concrete, concrete, brick, plaster, chipboard, wood, metal
Multiple variants
Anti-frost + clear view concentrate
Immediately available
- Windscreen cleaner concentrate with antifreeze for the windscreen washer system
- Removes oil, soot, salt and other typical winter soiling
- Absolutely compatible with paintwork, rubber and plastics
Multiple variants
Bath sealing and sound protection tape OHA-Easy 2 Protectband
Immediately available
- Barrier tape that is impermeable to water for double security e.g. after tearing off the silicone joint
- Self-adhesive wall and bath side
- Suitable for acrylic and steel baths
Multiple variants
Sealing clamp made of brass
Immediately available
- A system for Copper pipe DIN EN 1057 (formerly DIN 1786)
- For sealing holes, cracks and porous areas
- Max. Temperature/Pressure: 25° - 10 bar, 90° - 6 bar
Multiple variants
Tapping sleeves made of brass
Immediately available
- A system for copper pipes DIN EN 1057 (previously DIN 1786)
- For sealing holes, cracks and porous sections
- Max. temperature +90°C for water
Multiple variants
Leak Sleeve
Immediately available
- Safe sealing against splashing water
- The fitting is not connected to the wall, so it is sound-proofed
- Retrofitting without having to remove the old silicone or grout material
Multiple variants
Sanit windscreen anti-freeze concentrate
Immediately available
- Windscreen cleaner and frost protection concentrate in one
- Professional quality for the windscreen wiper system down to -30°C
- DEKRA tested
With anti-limescale formula
Multiple variants
Installation plug with plastic thread
Immediately available
- According to DIN 1988, Part 2,
- With plastic thread
- Only suitable for tightness testing during pipe installation
Multiple variants
Engine oil SAE 0W-20 Longlife IV
Immediately available
- Fully synthetic, high-performance engine oil with optimised temperature viscosity behaviour
- Specially developed for modern car petrol or diesel engines with exhaust air after-treatment systems and extended maintenance interval
Specifications and approvals: - VW 508 00/509 00
Multiple variants
Engine oil SAE 5W-40 Max Power
Immediately available
- Multi-functional high-performance engine oil
- Specially developed for modern cars with petrol and diesel motors with and without turbocharging and is used for vehicles without extended maintenance interval and with exhaust after-treatment systems
Specifications and approvals: - VW 502 00/505 00
Multiple variants
Engine oil SAE 10W-40 Premium
Immediately available
- Low-viscosity engine oil based on HC synthetic base oils
- Perfectly suited to petrol and diesel engines with and without turbo
- For vehicles without maintenance interval extension
Specifications and approvals:
Multiple variants
Engine oil SAE 15W-40 Basic
Immediately available
- SHPD engine oil with high power reserves
- Specially developed for the mixed car pool with petrol and diesel engines from various car, lorry, work and agricultural machine manufacturers
Specifications and approvals: - MB approval 228.3/229.1
Multiple variants
Bio-degradable chain adhesion oil
Immediately available
- For lubricating saw chains in agriculture and forestry, horticulture etc.
- Basic oil components are plant-based, with degradable additives
- Environmentally-friendly, bio-degradable saw chain medium
Multiple variants
Wall guide MD100 / MD150
Immediately available
- Reliable sealing of hoses, cables and a refeed line for rainwater systems to prevent drafts and backwater in an empty tube
- Suitable for core boreholes and guard tubes with internal diameter 100 and 150 mm
- Corrosion-resistant thanks to V2A stainless-steel design
Multiple variants
Aqua-Fix Pro adhesive
Immediately available
- Stick and seal on damp substrates, under water
- Suitable for: Pool/swimming pool area, polyester, synthetic resin materials, PVC, concrete, wood, natural stone, plastic, ceramics, enamel, steel, stainless steel, aluminium, brass, plexiglass, porcelain, melamine, polystyrene
- Temperature resistance: - 40° C to +90° C
Multiple variants
Testing foam
Immediately available
- The high-quality alternative to conventional leak detection spray
- Less required for each application
- Long life
Multiple variants
Wall guide MD100 MD150 MD200
Immediately available
- For sealing wall penetrations for gas, water, waste water pipes and cables against pressurised and non-pressurised water
- Sealing element 40 mm thick made of NBR for pressure tightness up to 1.5 bar
- Pressure discs, closed, made of V2A