Foaming, gluing, sealing

• Approvals for:
  
• DIN-DVGW for gas according to EN751-3 FRp and GRp and DIN 30660, test up to 100 bar with gases of the 1st, 2nd and 3rd family and with hot water (NV-5143BP0261)
  
• Drinking water test in accordance with KTW recommendations of the Federal Health Office
  

- 1-component sealant based on hybrid polymer SMP- Mould-resistant (microorganisms DIN ISO 846)- Very good primerless adhesion to numerous substrates, even when exposed to water- Very high mechanical strength, notch resistance and tear propagation resistance- For stress-compensating seals and dynami ...

• 1-component hybrid Adhesive
  
• Very good initial adhesion
  
• Low emission release during the curing phase
  

• Contains fungicidal and bactericidal active ingredients
  
• Vinegar cross-linking - acetoxy system
  
• Resistant to commercially available cleaning agents and disinfectants
  

• Hybrid sealant
  
• For use in the food sector
  
• Particularly UV & weather resistant
  

• 1-component hybrid adhesive-silane-terminated polymers
  
• Force-fit bonding
  Solvent-free
• Solvent-free
  

• Application:
  
• Venting
  
• Flushing connections
  

• For cleaning foam that has already hardened
  Application:
  
• Window frames
  
• Windowsills
  

• For mounting, sealing and filling components
  
• For concrete, masonry, cement etc.
  
• With adapter
  

• Eliminates water loss in drinking and industrial water pipes by up to 25 litres daily
  
• Pitting, cracks and leaky soldering points in copper, stainless steel, plastic and galvanised pipes can be sealed
  
• Crystallised in conjunction with external air
  

• Eliminates leaks in swimming pools
  
• Seals concrete basins and sectional basins
  
• The appearance of the swimming pool is unchanged
  

• Light for detachable connections
  
• Medium for connections that are strong but still detachable
  
• Heavy for permanent connections

• Preserves the shine of grouting
  
  Application:
  
• In sanitary areas
  
• Glass and facade construction

• 1K MS-Polymer® Adhesives
  
• Waterproof
  
• Silicones and solvent-free
  

• Solvent-free, silicone-compatible sealant
  
• For flexible surface sealing under ceramic coverings
  
• For moisture stress classes for walls and floors according to ZDB data sheet

• For pre-filling larger penetrations
  
• To achieve pressure tightness
  
• Content: 1 kg

• Can be used as a seal for gas, water and wastewater pipes in wall openings
  
• Suitable for retrospective installation
  
• Pressure-resistant up to 5 bar
  

• One-component hybrid sealant that reacts with atmospheric moisture with virtually no shrinkage and absolutely bubble-free
  
• High stretchability
  
• For a wide variety of substrates, also for moist
  

• Made of metal

• Multiple building structure feed-through for pipes and cables
  
• Easy handling and fast installation possible, even as retrofit
  
• High-quality construction
  

• Connecting joints subject to low stress in indoor and outdoor areas, e.g. small and medium-sized wooden windows, roller shutter boxes and window sills
  
• Can be painted over with most commercially available paint systems (according to DIN 52452, Part 4, test method A1, A2 and A3)
  
• Good adhesion on common building substrates
  

• New generation of neutral-curing silicon sealant: Alkoxy and Oxime (MEKO) free
  
• Wide range of applications and adhesion
  
• Universally paint-compatible
  

• Edge sealing of floor coverings and tiles in kitchens and bathrooms
  
• Elastic, acid-curing silicone sealant
  
• Meets the criteria of IVD bulletin no. 3
  

• Elongated fibre structure with adhesive spine
  
• Inspected according to TÜV, BAM und DVGW standards
  
• Temperature-resistant from -240°C to +270°C
  

• Permanently elastic compound for flexible sealing of pipe and cable wall penetrations, manholes, tank bottoms, seams and cracks
  
• For complicated and irregular shapes
  
• Suitable for multiple pipes and cables with a minimum spacing of 1 cm
  

• High-strength
  
• Up to 0.15 mm bond gap
  
• Bridging of the play clearance prevents fretting corrosion
  

• For bonding different materials such as metals, engineering thermoplastics and thermoset laminates such as SMC together
  
• High-strength
  
• Achieves impact resistant connections
  

• Two-component adhesive stick
  
• Curing time: 10 min.
  
• Temperature range: -30 °C to +120 °C
  

• For boilers, boiler elements, ovens and stoves
  
• For assembly and sealing
  
• Flameproof up to 1000°C

• Consisting of:
  
  24 x Universal pistol foam 811
  
• 1-component polyurethane foam for insulation, filling and insulating
  
• Germany:
  - Building material class E / fire class B2
  - Shelf life (from production): 18 months (when stored in a cool and dry place).
  - Waste: Free collection and recycling by P.D.R.
  

• For coating core holes
  
• Suitable for indoor and outdoor use
  
• Protective coating for concrete, fibre concrete, masonry, steel and timber
  

• Made of plastic
  
• Professional quality dosing gun
  
• Threaded part Teflon coated
  

• With safety valve
  
• Humidity-curing
  
• Tested according to DIN 4102 B2 and B3
  

• Made of synthetic rubber
  
• The highest degree of adhesion on wet substrates
  
• Copper compatible
  

• 1-component PU polyurethane foam
  
• With adapter
  
• Waterproof
  

• Professional high-performance silicone grease for lubrication and care
  
• Food-safe
  
• Odourless