Tubular guide elbows
90 820 13
Tubular guide elbow set consisting of 2 tubular guide elbows short + 1 fixing bracket
Immediately available
- Consisting of:
- 2 x tubular guide elbow set 16/17 mm (90 806 61)
- 1 x fixing bracket centre distance 50 mm
90 129 09
Grid bend flipflex for 10/14 mm pipes Length 137mm
Immediately available
- Radius: 60 mm
- ø inside: 14.6 mm
- For Pipe ø: 10/14 mm
90 806 61
Tubular guide elbow flipflex for 16/17 mm Pipe fixing bracket, fixing bracket. possible, without fastening strap
Immediately available
- Flexible pipe guide elbow, for connecting flexible pipelines to heating manifolds.
- Radius: 60 mm
- Ø internal: 17.7 mm
90 806 64
Tubular guide elbow set Flipflex for 20 mm pipe long and extra stable
Immediately available
- Measuring:
Dimension from the unfinished floor to the lower edge
Measure tap block. Mark the
pipe in accordance with the table included..
Pushing over:
Push the flipflex over the pipe up to the marked
point.
Bending:
Bend the flipflex including the pipe with a flick of the
wrist. This is particularly easy if you
encompass both ends of the flipflex as you do so!
Connecting:
Push the screw connection onto the
calibrated pipe and tighten on the tap block.
Fixing:
Connect the two pipelines on the flipflex
with the fixing bracket.
Nail it to the floor.
Securing:
To ensure the accurate centre distance,
put the double clip on the top. - Radius: 100 mm
- Internal ø: 20.8 mm
90 806 63
Tubular guide elbow set Flipflex for 18/20 mm pipe
Immediately available
- Measuring:
Dimension from the unfinished floor to the lower edge
Measure tap block. Mark the
pipe in accordance with the table included..
Pushing over:
Push the flipflex over the pipe up to the marked
point.
Bending:
Bend the flipflex including the pipe with a flick of the
wrist. This is particularly easy if you
encompass both ends of the flipflex as you do so!
Connecting:
Push the screw connection onto the
calibrated pipe and tighten on the tap block.
Fixing:
Connect the two pipelines on the flipflex
with the fixing bracket.
Nail it to the floor.
Securing:
To ensure the accurate centre distance,
put the double clip on the top. - Radius: 75 mm
- Internal ø: 21.2 mm
90 806 62
Tubular guide elbow flipflex for 15/16 mm Pipe fixing bracket, fixing bracket. possible, with fastening strap
Immediately available
- Measuring:
Dimension from the unfinished floor to the lower edge
Measure tap block. Mark the
pipe in accordance with the table included..
Pushing over:
Push the flipflex over the pipe up to the marked
point.
Bending:
Bend the flipflex including the pipe with a flick of the
wrist. This is particularly easy if you
encompass both ends of the flipflex as you do so!
Connecting:
Push the screw connection onto the
calibrated pipe and tighten on the tap block.
Fixing:
Connect the two pipelines on the flipflex
with the fixing bracket.
Nail it to the floor.
Securing:
To ensure the accurate centre distance,
put the double clip on the top. - Radius: 90 mm
- With fastening strap
90 839 78
Tubular guide elbow set Flipflex for 17/18 mm pipes Length 190mm
Immediately available
- Radius: 75 mm
- Internal ø: 18.6 mm
- For pipe ø: 17/18 mm