alpen: Drill sets

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN- In metal case ...

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN- In plastic case ...

• Area of application: alloyed and unalloyed steel, copper, brass, aluminium
  Steels < 1.300 N/mm2, Stähle > 45 HRC, stainless steels
  
• Shaft: cylindrical
  
• Design: 5% cobalt alloyed. Specially for deep holes with special groove formation
  

- Application: For tiles, masonry, metal, wood and plastic- Shank: Cylindrical- Design: Shot-peened surface, diamond-ground cutting edges and fast bore dust extraction thanks to 4-fold stepped profile- In plastic case ...

• Application: for the hardest stoneware tiles
  
• Shaft: anti-slip and (1/4”) hexagonal shaft
  
• Design: centring tip of the tile drill enables precise positioning, concrete drill enables subsequent drilling in masonry
  

- Application: Alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle- DIN: 338 RN- In metal case ...

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter
  Box 450
  

• Area of application: for rotary drilling in tiles, masonry metal, wood and plastic
  
• Shaft: SDS-Plus
  
• Design: with shortened SDS-plus attachment, this means that automatic impact stop function in SDS-Plus hammer drills and hammer drills/chisel hammers is guaranteed
  

• Application: for extremely hard porcelain tiles to Mohs/Ritz hardness 9, as well as glass and porcelain
  
• Shaft: anti-slip
  
• Design: centring tip allows for precise positioning
  

• Application: for extremely hard porcelain tiles to Mohs/Ritz hardness 9, as well as glass and porcelain
  
• Shaft: anti-slip
  
• Design: centring tip allows for precise positioning
  

• Area of application: For Drills in reinforced concrete
  
• Shank: SDS-Plus
  
• Design: 4-cutter
  

• Area of application: For Drills in reinforced concrete
  
• Shank: SDS-Plus
  
• Design: 4-cutter
  

• Area of application: For Drills in reinforced concrete
  
• Shank: SDS-Plus
  
• Design: 4-cutter
  

• Area of application: For Drills in reinforced concrete
  
• Shank: SDS-Plus
  
• Design: 4-cutter
  

• Area of application: For Drills in reinforced concrete
  
• Shank: SDS-Plus
  
• Design: 4-cutter
  

• Area of application: For alloyed and unalloyed steel
  
• Shank: 6.3 mm, 1/4" hexagon
  
• Design: With tight tolerances and high concentricity
  

• Area of application: For tiles, masonry, metal, wood and plastic
  
• Shank: 6.3 mm (1/4") hexagon
  
• Finish: Shot-peened surface
  Consisting of:
  

• Area of application: Concrete, masonry and natural stone, for rotary drilling in ceramic and marble
  For Impact drills and Hammer drills with drill chuck holder
  
• Shank: Cylindrical
  
• Design: Hammer-resistant thanks to state-of-the-art vacuum hardening, surface specially treated
  

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter
  

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter
  

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter
  

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter
  

• Area of application: For drilling cylindrical holes in material up to 4 or 6 mm thick
  
• Design: Bright surface finish
  
• Consisting of:
  - ø (mm): 4-12/4-20/6-30
  

• Area of application: For working on concrete, natural stone, masonry
  
• Shank: SDS-Max
  
• Drills:
  - Shot peening
  - Heavy-duty carbide tip
  - Length 520 mm, Drills-ø: 25, 30, 35 mm
  

• Area of application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics
  
• Shank: Cylindrical
  
• Design: Break-proof due to high elasticity and toughness. Point angle 118°
  

• Application: for extremely hard stoneware tiles to Mohs/Ritz hardness 9, as well as glass and porcelain
  
• Shaft: cylindrical
  
• Design: centring tip allows for precise positioning and accurate holes with no breakouts
  

• Application: for extremely hard stoneware tiles to Mohs/Ritz hardness 9, as well as glass and porcelain
  
• Shaft: cylindrical
  
• Design: centring tip allows for precise positioning and accurate holes with no breakouts
  

• Area of application: for drilling in reinforced concrete
  
• Shaft: SDS-Plus
  
• Design: 4-cutter
  

- Area of application: tough and hard materials such as rust and acid-resistant chrome-nickel steels, alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle; break-proof- DIN: 1897 PZ- In metal case ...

- Application: Alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle- DIN: 338 RN- In plastic case ...

Metal drill bit set, 19-piece- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-proof due to high elasticity and toughness- DIN: 338 RN- Consisting of: - Drill bit ø (mm): 1-10 (in 0.5 mm increments)Replacement drill bits, 6 pieces- Con ...

Tile drill Alpen C-Protector- Application: For extremely hard porcelain stoneware tiles up to Mohs/Ritz hardness 9 as well as glass and porcelain- Spindle speed: Max. 600 rpm- Not suitable for percussion drilling- No cooling required- ø (mm): 6/8/10Hammer drill Force X- Application: For drilling in ...