REMS: Pressing, bending

• Light, small, handy for quick and easy work
  
• Bending segments with smaller bending radii especially for composite pipes Uponor Uni Pipe PLUS
  
• For bending pipes up to 90°
  

for system:Geberit Mepla. ...

• For all common pressfitting systems: ø 10-40 mm
  
• 360° rotatable holder for Crimping tongs Mini
  
• Pressing in less than 4 seconds
  

• For brazing copper tubes in cold and hot water installations, gas installations, refrigeration and air-conditioning technology
  
• Hard solder SO 17672-CuP 179
  
• 1 kg in carton
  

• - 16 - 22 - 25/26 - 32
  - Battery Li-Ion 22 V, 2.5 Ah
  - Quick charger 230 V
  Explanation of abbreviations:
  
• Cu: hard, semi-hard, soft Copper pipes, also thin-walled, EN 1057
  
• Cu: 12735: Copper pipes K65 for Cold and air conditioning according to EN 12735-1, EN 12449
  

• Robust oil-hydraulic pipe bending machine for dimensionally accurate bending of pipes up to 90°
  
• Scope of delivery:
  - Oil hydraulic pipe bending machine
  - Drive unit with slide roller carrier, upper slide roller carrier with laterally movable slide roller bearing plate
  - 2 x slide rollers
  - Bending segments St or V
  -Stable transport box
  
• Without 3-legged base frame
  

• For soldering copper pipes in cold and hot water installations
  
• Soft solder paste from solder powder Sn97Cu3
  
• Contents 250 g

• For expanding metallic pipes
  
• Suitable for:
  - Ex-Press CU 22 V ACC
  - Ex-Press CU

• For holding pressing heads
  
• For many common compression sleeve systems with compression sleeve ø 12-32 mm (not for Rehau)
  
• Only one type of press head for Ax-Press
  

• For expanding plastic and composite pipes
  
• Suitable for:
  - Ex-Press P 22 V ACC
  - Ex-Press P

• Rotatable hydraulic cylinder, enabling work on Workbenches and floors
  
• Bending of:
  - Soft copper and nickel-containing stainless steel pipes up to ø 22 mm
  - Carbon steel, soft, coated up to ø 18 mm
  - Aluminium composite pipes up to ø 32 mm (segments included in the scope of delivery only up to ø 22 mm)
  
• Scope of delivery:
  - Hydraulic drive unit
  - Sliding shoe carrier
  - Bending segments
  - Plastic case
  - 14 - 16 - 20 - 25/26 mm
  Explanation of abbreviations:
  

• Robust oil-hydraulic pipe bending machine for dimensionally accurate bending of pipes up to 90°
  
• Scope of delivery:
  - Oil hydraulic pipe bending machine
  - Drive unit with slide roller carrier, upper slide roller carrier with laterally movable slide roller bearing plate
  - 2 x slide rollers
  - Bending segments St or V
  -Stable transport box
  
• Without 3-legged base frame
  

• Metal-free
  
• PU 10 units

• For expanding and calibrating metallic pipes:
  - Copper pipes, ≤ 1.5 mm, ø 8-42 mm
  - Aluminium and precision steel tubes ≤ 1.2 mm, ø 8-42 mm
  - Steel tubes, ≤ 1.0 mm, ø 8-42 mm
  
• Taper angle 18°
  
• In sheet steel case
  

• For bending segment and slide pieces

• REMS Hydro-Swing with aluminium bending segments, especially for:
  - Geberit Mapress stainless steel (EN 10088, 1.4401)
  - Geberit Mapress stainless steel (EN 10088, 1.4521, nickel-free)
  - Geberit Mapress carbon steel (EN 10305-3, 1.0034 (E195)
  - Viega Sanpress (EN 10088, 1.4401)
  - Viega Prestabo (EN 10305-3, 1.0308 (E235)
  - 15 - 18 -22
  - Aluminium bending segments
  Explanation of abbreviations:
  
• Cu: hard, semi-hard, soft Copper pipes, also thin-walled, EN 1057
  
• Cu: 12735: Copper pipes K65 for Cold and air conditioning according to EN 12735-1, EN 12449
  

• Rotatable hydraulic cylinder, enabling work on Workbenches and floors
  
• Bending of:
  - Soft copper and nickel-containing stainless steel pipes up to ø 22 mm
  - Carbon steel, soft, coated up to ø 18 mm
  - Aluminium composite pipes up to ø 32 mm (segments included in the scope of delivery only up to ø 22 mm)
  
• Scope of delivery:
  - Hydraulic drive unit
  - Sliding shoe carrier
  - Bending segments
  - Plastic case
  - 10 - 12 - 14 - 15 - 16 - 17 - 18 - 20 - 22 - 25/26 - 32 mm
  Explanation of abbreviations:
  

• Clockwise and anti-clockwise rotation
  
• Power: 1000 W
  
• 230 V, 50 Hz
  

• For soldering copper pipes in cold and hot water installations
  
• Soft solder wire Sn97Cu3
  
• Wire ø 3 mm
  

• Angle scale 0 to 180° on every bending segment and mark on every sliding piece for dimensionally accurate bending
  
• In accordance with DVGW worksheet GW 392 for copper pipes ø 35 mm minimum bending radius 114 mm required
  Explanation of abbreviations:
  
• Cu: hard, semi-hard, soft Copper pipes, also thin-walled, EN 1057
  

• For expanding plastic and composite pipes:
  - ø 12-32 mm
  
• Cone angle 18°
  
• In sheet steel case
  

ST 10255: Steel pipes (threaded pipes) EN 10255V: Composite pipes in press-fitting systemsSliding piece ø 75 mm, pack of 2 (item no. 590111), required1) Bending radius mm of the inside of the bend (EN 10255)2) Bending radius mm of the neutral axis of the bend (DVGW VP 632) ...

• - 15 - 18 - 22
  - Aluminium bending segments
  - Battery: Li-Ion 22 V, 2.5 Ah
  - Quick charger 230 V
  Explanation of abbreviations:
  
• Cu: hard, semi-hard, soft Copper pipes, also thin-walled, EN 1057
  
• Cu: 12735: Copper pipes K65 for Cold and air conditioning according to EN 12735-1, EN 12449
  

• Suitable for:
  - Ax-Press H
  - Ax-Press 25 22 V ACC

• For expanding and calibrating metallic pipes:
  - Copper pipes, ≤ 1.5 mm, ø 8-42 mm
  - Aluminium and precision steel tubes ≤ 1.2 mm, ø 8-42 mm
  - Steel tubes, ≤ 1.0 mm, ø 8-42 mm
  
• Taper angle 18°
  
• In sheet steel case
  

• For expanding plastic and composite pipes:
  - ø 12-32 mm
  
• Cone angle 18°
  
• In sheet steel case
  

• For holding the expander heads P and Cu
  
• Suitable for:
  - Ex-Press 22 V ACC
  - Ex-Press

• With insert
  
• 1 bending segment and sliding piece each R 100 and R135/R 140, 90°

• For system (information without guarantee, see note below):
  
• T:
  - Tigris K1/M1
  - Tigris K5/M5
  
• U:
  - Uponor MLC