SPIROTECH
90 060 47
Commissioning for Pressure maintenance SpiroPress
Delivery item
- When you buy a SpiroPress® PicoControl Kompact*, Spirotech will take care of the commissioning (worth €430.00) free of charge during the promotional period of 01.09. – 29.10.2020.
- Send the completed form by email to heizungstechnik@weinmann-schanz.de or by fax to 0 74 33. 98 92 92
- The order will be forwarded to Spirotech
90 060 44
SpiroCare® Water analysis ProLab 2 sample bottles of 75ml each
Delivery item
- Standard analysis with the most important values and parameters
- Sufficient to safeguard manufacturer warranties
- Sufficient for smaller systems e.g. single-family homes, small multi-family homes
90 060 41
Bypass set DN25 (1") suitable for SpiroPress PicoControl Compact
Delivery item
- For use of an external SpiroVent Superior vacuum degasser
- DN25 (1”), PN10
Multiple variants
Hydraulic switches SpiroCross AX-J m. solenoid
Delivery item
- Heating and cooling systems with primary and secondary circuits or with separate groups and Pumps, such as Underfloor heating or Heat pumps, require optimised hydronic balancing
Technical data: - Operating pressure: max. 10 bar
- Operating temperature: max. 110°C
90 854 42
Spirotech flush adapter
Immediately available
- Can be installed on the SpiroTrap MB3 and SpiroVent RV2 connections for flushing operations
- Using this adapter, cleaning devices such as, for example, flushing compressors or additives can be connected or added
- Can only be used up to size DN 25 or clamp connection
90 070 55
Vacuum degasser Spirotech Superior type S250
Immediately available
- For physical degassing of the system water in closed heating and cooling systems
- For small and medium-sized installations in commercial and residential buildings
- Completely pre-assembled control and hydraulic unit for wall mounting
90 854 01
Replacement fan cap for SpiroVent
Immediately available
- For Spirovent, Spiro Top and Spiro Combiair separator DN20 (3/4") IT to DN50 (2") IT
- Not suitable for Spirovent RV2
- Temperature max.: 110 °C
90 069 83
Automatic air vent SpiroTop Special DN15 (1/2”) IT
Immediately available
- DN 15 (1/2") IT
- Leakage-free
- Cannot be shut off
Multiple variants
Spirotrap dirt separator with magnetic field enhancement technology, flange version
Immediately available
- Advantages of Spirotrap with magnet:
- Outstanding protection of pumps with magnetic rotors and other valuable system components against (magnetic) sludge particles
- Extremely easy to use: The sludge is drained very easily by actuating a draw-off mechanism
97 018 33
SpiroTop Solar AutoClose 1/2''IT
Immediately available
- For solar systems
- With connection thread on the vent valve for vent pipe
Technical data: - Housing: brass
90 060 43
System separator DN15 (1/2") suitable for SpiroPress PicoControl Compact
Delivery item
- For use with products with automatic make-up function
- DN15 (1/2”), IT
90 024 04
Replacement Seal sets for Dirt separator Spirotrap® MB3 PU = 10 pieces
Immediately available
- Suitable for Spirotrap MB3 to DN 25 (1")
- PU = 10 units
Multiple variants
Air separator Spirovent® type AutoClose Solar Uni
Immediately available
- Continuous and effective microbubble degassing of heating, cooling and process systems
- Leakage-free and easy to install
- Maintenance-free operation
Multiple variants
Spirotrap dirt separator, flange version
Only a few items left in stock
- Advantages of Spirotrap:
- Even extremely small particles, from 5 μm (= 0.005 mm), are separated and eliminated
- Rinses sludge particles while the system is running
90 060 46
Commissioning for Vacuum degassing Superior
Delivery item
- When you buy a SpiroVent®Superior*, Spirotech will take care of the commissioning (worth €380.00) free of charge during the promotional period of 01.09. – 29.10.2020.
- Send the completed form by email to heizungstechnik@weinmann-schanz.de or by fax to 0 74 33. 98 92 92
- The order will be forwarded to Spirotech
90 854 02
Replacement Solar fan cap for SpiroVent
Currently not in stock - Time of delivery: approx. 2-4 weeks
- For air separator Spirovent Solar DN20 (3/4") IT to DN40 (1 1/2") IT
- Not suitable for Spirotop (all versions) and Spirovent ("Auto Close” version)
- Temperature max.: 180°C
90 860 75
Demo cocktail shaker MB3
Only a few items left in stock
- Simulates the function of the magnetite and dirt separator, which should now be installed in every heating system
Multiple variants
Spirovent air separator, flange version
Immediately available
- Advantages of Spirovent:
- Effective removal of circulating air and micro bubbles
- Removal of air inclusions
90 076 56
De-sludging and de-aeration package Spirotech, Spirovent RV2, Spirotrap MB3, DN25(1")
Immediately available
- 1 x magnetite and dirt separator MB3 DN 25 (1“) IT
- Can be installed horizontally and vertically
- Housing material: brass
1 x Microbubble air separator Spirovent RV2 DN 25 (1") IT
90 024 05
Replacement Seal sets for Dirt separator Spirotrap® MB2
Immediately available
- Suitable for Spirotrap MBL from DN 32 (1 1/4")
90 828 68
Insulating shell suitable for Hydraulic switches SpiroCross AX100(J)-150(J)
Currently not in stock
- Suitable for AX100, AX125 and AX 150
- Half-shells made of EPP hard foam
- Dimensions with insulation (H x W x D): 482 x 150 x 150 mm
Multiple variants
SpiroVent® air separator, model universal RV2
Immediately available
- Continuous and effective microbubble degassing of heating, cooling and process systems
- Leakage-free and easy to install
- Maintenance-free operation
90 034 16
Automatic quick bleeder Spirotop 1/2"
Immediately available
- Any risk of the valve clogging up with dirt is eliminated
- Leakage-free
- Cannot be shut off
90 024 03
Replacement magnetic sleeve for Spirotrap, dirt separator MB3/MB2
Immediately available
- Suitable for Spirotrap MB3/ MBL
Multiple variants
Microbubble deaerator Spirovent®, horizontal model
Immediately available
- Continuous and effective microbubble degassing of heating, cooling and process systems
- Leakage-free and easy to install
- Maintenance-free operation
Multiple variants
Air, sludge and magnetite separator SpiroCombi® MB3
Immediately available
- A micro air bubble and dirt separator combined with a performance-enhancing external magnet for cooling and hot water systems
- Variable connection that can be rotated 360 degrees for vertical, horizontal, or even diagonal pipelines
- Flow abatement in the separation chamber via a special spiral pipe enables air, micro air bubbles, magnetic and non-magnetic dirt and sludge particles to be removed continuously in the event of very low pressure loss
Multiple variants
Automatic pressuriser SpiroPress® PicoControl Kompact
Delivery item
- For use in apartment buildings, commercial properties, industry, local and distance heating networks
- Pump-controlled pressure holding with attached depressurised expansion vessel to accommodate expansion volumes and maintain constant pressure in closed heating, air-conditioning and cooling systems
- Supplied fully pre-assembled
90 024 06
Replacement plastic clips for magnet Spirotrap MB3/MB2 PU = 10 pieces
Immediately available
- Suitable for Spirotrap MB3/ MBL
- For magnet
- PU = 10 units
Multiple variants
Magnetite and dirt separator SpiroTrap® MB3/MBL
Immediately available
- Removes magnetic and non-magnetic sludge particles from the heating system
- Removable, strong magnet with field enhancement on the external side of the dirt separator
- Can be installed horizontally and vertically
Technical data:
90 872 37
Pre-fabricated insulation for Spirovent/Spirotrap DN50/DN65
Immediately available
- Suitable for connection sizes DN 50-65
- Insulating shells made of PUR hard foam
- In accordance with the German Heating System Regulation (HeizAnlV) and Energy Saving Regulation (EnEV)
90 502 00
Spirotrap pre-fabricated insulation for dirt separator Connection 22mm H=140
Only a few items left in stock
- Suitable for connection sizes: 22 mm, DN 20 (3/4”) to DN 40 (1 1/2”), and vertical: 22 mm and DN 20 (3/4”) to DN 25 (1”)
Multiple variants
Microbubble deaerator SpiroVent® Solar AutoClose, horizontal
Immediately available
- Air in solar fluids
The viscosity of liquids that contain glycol is significantly higher than water. Depending on the concentration of the liquid, air bubbles require several hours to rise to the surface. Air bubbles trapped in the liquid therefore remain in the volume flow and pass through the entire system.
The consequence: problems with circulation, heat transfer and corrosion.
The little air bubbles are forced to rise by the fixed resistors in the spiral pipe. Installation must not be at the highest point but directly on the solar flow pipe.
Temperature: max. 180°C
Operating pressure: max. 10 bar
Housing: brass
”AutoClose”
This design also offers differentiation between air and steam, and automatically closes when the evaporation temperature is reached. Effectively keeps solar systems consistently air-free.
Advantages: - No stagnation caused by steam emission
- No fluid loss
90 502 11
Spirovent Pre-fabricated insulation for Spirovent Air separator, up to size DN 25 (1``)
Immediately available
- Suitable for connection sizes: 22 mm, DN 20 (3/4”) to DN 40 (1 1/2”), and vertical: 22 mm and DN 20 (3/4”) to DN 25 (1”)
Multiple variants
Vacuum degassing SpiroVent®Superior
Only a few items left in stock
- Fully automatic vacuum degasser for physical degassing of the system water in closed heating and cooling systems
- Compact and fully pre-assembled control and hydraulic unit, suitable for floor or wall fitting
- detachable, enclosed housing with sound insulation function
Multiple variants
Spirotrap dirt separator with magnetic field enhancement technology, welded union
Immediately available
- Advantages of Spirotrap with magnet:
- Outstanding protection of pumps with magnetic rotors and other valuable system components against (magnetic) sludge particles
- Extremely easy to use: The sludge is drained very easily by actuating a draw-off mechanism
Multiple variants
Pre-fabricated insulation
Immediately available
- Suitable for air separator SpiroVent® universal RV2 and dirt separator MB3/ MBL
- Separator not included!