TECO®

• Material: plastic
  
• Can be extended in multiple ways
  
• ø: 49 mm

• Can be used as an intermediate piece for precise dimensional arrangement of several ball valves
  
• Centre distance: 100 mm
  
• Spirit level for vertical and horizontal alignment included

• Operating pressure max.: 16 bar
  
• Operating temperature max.: 95°C
  
• Quick and tool-free Fastec plug-in adapter connection with pressure pin lock
  

• According to EN 331 / DVGW
  
• For gauge counter G2.5-G6
  
• Operating pressure: 5 bar
  

• External thread: DN 15 (1/2")
  
• Trigger temperature TSD: 96 °C
  
• Response time: approx. 20 sec.
  

• Material: brass
  
• For drinking water
  
• Operating pressure: 10 bar
  

• IT x ET

• K4 is a shut-off system that can be fitted in any environment without affecting the aesthetics. The compact design makes fitting easy.
  
• Installation box with adjustable fixing brackets
  
• Replaceable valve body
  

• K4 is a shut-off system that can be fitted in any environment without affecting the aesthetics. The compact design makes fitting easy.
  
• Installation box with adjustable fixing brackets
  
• Replaceable valve body
  

• External thread: DN 15 (1/2”)
  
• Connecting gas stoves, -cookers, -grills, -baking ovens and -heating appliances
  
• For all plug-in gas hoses with standard plug according to DIN 3383 Part 1
  

• Polished and chrome-plated with thermal fittings fuse
  
• Ball seals made of: Teflon
  
• Spindle seals: O-ring made of NBR 70 ShA
  

• Made of brass with full passage
  
• Suitable for gas installations with low pressure (natural gas, mains LPG) gas, compressed air, fuels and heating oil
  
• Operating pressure: 0.1 to 5 bar
  

• Assembly unit for connecting gas twin pipe meter DN 25 x DN 32 (1 1/4”)
  
• According to EN 331 / DVGW
  
• Operating pressure: 5 bar
  

• Fits K4 Duplex flush-mounted valve
  
• For extension by 23 mm - multiple extensions also possible

• Panel with magnetic closure
  
• Material: plastic
  
• Dimensions (W x H): 230 x 140 mm

• Assembly unit for connecting gas twin pipe meter DN 25 x DN 32 (1 1/4”)
  
• According to EN 331 / DVGW
  
• Operating pressure: 5 bar
  

• According to EN 331 / DVGW
  
• For gauge counter G2.5-G6
  
• Operating pressure: 5 bar
  

• Compact water meter installation section for flush-mounted installation, pre-assembled
  
• With spacer pipe DN 20 (3/4”), length 80 mm
  
• Shut-off ball valve with replaceable seal seat
  

• For installations in the areas of drinking water, industry, cooling and heating (for measuring instruments with a sensor connection)
  
• Suitable for drinking water in accordance with UBA whitelist
  
• Operating pressure: 40 bar
  

• Assembly unit for connecting gas twin pipe meter DN 25 x DN 32 (1 1/4”)
  
• According to EN 331 / DVGW
  
• Operating pressure: 5 bar
  

• For installations in the areas of drinking water, industry, cooling and heating (for measuring instruments with a sensor connection)
  
• Suitable for drinking water in accordance with UBA whitelist
  
• Operating pressure: 40 bar
  

• Model GST for domestic installation according to DVGW-VP305, as a measure to actively deter manipulation in accordance with TRGI
  Technical properties:
  Horizontal installation: for metal conductors and plastic pipes
  Vertical installation: only for metal conductors, flow direct from bottom upwards
  Operating pressure: 15-100 mbar
  Operating temperature: -20°C to +60°C
  Pressure loss: dp<0.5 mbar
  Overcurrent: VL <30 lt/h at 100 mbar
  External temperature resistance: 925 °C - 5 bar
  Internal temperature resistance: 200 °C
  Area of application: all gas types according to EN437 and DVGW G260/1
  Function:
  the flow monitor blocks the line when the flow rate selected is achieved. After the cause is rectified, pressure compensation occurs via an overflow opening, which enables the safety device to re-open.
  
  Construction:
  the internal springs do not come into contact with the flow of gas, which means they do not get dirty, ensuring a long service life. The overview opening is also protected in the open position to safeguard the re-opening function.
  !!! Particularly low pressure loss (< 0.5 mbar) !!!
  
• Flow direction from internal to external thread (I/E)

• Model GST for domestic installation according to DVGW-VP305, as a measure to actively deter manipulation in accordance with TRGI
  Technical properties:
  Horizontal installation: for metal conductors and plastic pipes
  Vertical installation: only for metal conductors, flow direct from bottom upwards
  Operating pressure: 15-100 mbar
  Operating temperature: -20°C to +60°C
  Pressure loss: dp<0.5 mbar
  Overcurrent: VL <30 lt/h at 100 mbar
  External temperature resistance: 925 °C - 5 bar
  Internal temperature resistance: 200 °C
  Area of application: all gas types according to EN437 and DVGW G260/1
  
• Flow direction from external to internal thread (E/I)

• DN 20 - DN 50
  
• With a lead seal and lockable device
  
• DIN-DVGW-approved
  

• Polished and chrome-plated with thermal fittings fuse
  
• Ball seals made of: Teflon
  
• Spindle seals: O-ring made of NBR 70 ShA
  

• According to EN 331 / DVGW
  
• For gauge counter G2.5-G6
  
• Operating pressure: 5 bar
  

• According to EN 331 / DVGW
  
• For gauge counter G2.5-G6
  
• Operating pressure: 5 bar
  

• Package consisting of:
  
• 5x Gas flow monitors DN 25 (1"), 15-100 mbar, 4 m³/h
  Free of charge: 2x leak finder 400 ml spray can

• Assembly unit for connecting gas twin pipe meter DN 25 x DN 32 (1 1/4”)
  
• According to EN 331 / DVGW
  
• Operating pressure: 5 bar
  

• IT x ET

• Fits Ultra flush-mounted valves
  
• Cover Ø 75 mm
  
• Plug-in cover
  

- Brass- Rotatable O-ring seal- Suitable for Teco telescopic piece ...

• Suitable for K4 Duplex flush-mounted valve
  
• Dimensions (W x H): 135 x 90 mm

• Fits ball valve Teco Control
  
• PU = 2 units