Welding, soldering

- High-quality, halide-activated, lead-free solder wire for manual and automatic soldering in electrical engineering, electromechanics and electronics- High wetting speed and spread on all surfaces commonly used in electrical engineering- No flux splashes on the assembly, system components or the us ...

- Flux for soldering copper and copper alloys in copper pipe installation, radiator construction, plumbing work, dip soldering, fitting manufacture and other soldering work- Yellowish white pasty ...

• For flux-free brazing of Copper pipes, especially in the Cold and air conditioning sector
  
• Silver-containing copper brazing alloys with phosphorus content for flux-free soldering of copper pipes in oil, gas and liquid gas installations as well as in Heating and drinking water installations with pipe dimensions over 28 x 1.5 mm.
  
• Rod size: 500 mm x 2 mm, square
  

• For soldering steel and stainless steel pipes, but also non-ferrous metals except aluminium
  
• With flux
  
• Alloy: Sn96.5Ag3.5
  

• For hose assembly burner

• For hosepack burners
  
• Plastic
  
• Colour: white/pink

• With blast vent
  
• ø 63 mm
  
• Slotted

• connections M 20 x 1 female

• For overlap welding of carbon steels and carbon-manganese steels
  
• For thin metal parts (<5.0 mm)
  
• Classification: AWS A5.20: E71T-GS / EN ISO 17632-A: T 42 Z W N 1 H15

• Roll ø [mm]: 200
  
• Wire ø: 0.8 mm
  
• Weight [kg]: 5.0

• ø: 2.4 mm
  
• Length: 1000 mm
  
• Weight: 5 kg
  

• For soldering titanium zinc, sheet steel and refined zinc
  
• For soldering heavily oxidised surfaces, e.g. titanium zinc and zinc gutters and downpipes (mill-finish)
  
• Model 3.2.2.A
  

• For soldering copper and copper alloys
  
• Model 3.1.1.A (DIN 8511, F-SW 21)
  
• Flux
  

• For soldering titanium zinc and galvanised sheet steel
  
• Formulated specifically for RHEINZINK® mill-finish and RHEINZINK® -”preweathered -pro“
  
• Model 3.2.2.A
  

• For soldering stainless steel roof sheeting
  
• Model 3.2.1.A
  
• Flux
  

• Rutile-based electrode with very low carbon content, designed for welding austenitic stainless steels without molybdenum (316, 316L, 316 Ti/Nb). It is very resistant to chemical attack and salt corrosion. It is, therefore, recommended for use in the petrochemical, chemical and marine industries.
  
• Soft and even burning
  
• Good weld
  

• TIG filler metal Inox 308L as thin welding rod for welding austenitic stainless steels without molybdenum content (304, 304L, 321, 347). It is recommended as the first layer in all cases where regular firing and good strength are expected.
  
• Application:
  - Piping, only for thin wall thicknesses up to max. 3 mm and for root layers
  - Exclusively for systems where the operating temperature remains limited to 350°.
  - Suitable for use in the food industry, with organic acids (308L)
  - Corrosion resistant

• Multipurpose electrode. Steel/stainless steel with direct current, aluminium with alternating current
  
• The E3 tungsten electrodes (purple) are versatile. Their advantages are particularly evident when welding steel, stainless steel, copper and brass in the low and medium current range. Aluminium can also be welded in AC mode. Unlike thoriated electrodes, these electrodes are not radioactive. They are characterised by good ignition properties and uniform welds. They are suitable for automated welding.

• Number of wire guide rollers: 2 x

• Solid wire with copper coating for gas shielded arc welding of low or unalloyed carbon steels. Can be used for many metal constructions due to its good mechanical properties.
  
• Applications:
  - Automotive industry
  - Railroad construction
  - Shipbuilding
  - Construction industry in general
  - Vessel, boiler
  
• Classification:
  - AWS 5.18: ER 70S-6 EN ISO 14341-A: G46 4 M21 3Si1
  - DIN 8559: SG2

• Solid wire filler metal for MIG welding of austenitic stainless steels without molybdenum of types 304, 304L, 321, 347. For all types of metal constructions at operating temperatures up to 350°C
  
• Applications:
  - For all types of metal constructions at operating temperatures up to 350°C
  - General use with low corrosion
  
• Classification:
  - AWS 5.9 : ER 308L Si
  - EN ISO 14343-A : G19 9 L Si

- Low carbon filler metal for MIG welding of austenitic stainless steels (types 316, 316L, 304, 304L). When doped with molybdenum, better corrosion resistance to chloride (in saline environments) is made possible. The flowability and wettability of the molten metal is improved by the high silicon co ...

• - Filler metal for welding carbon and manganese-carbon steels without shielding gas. It is mainly used for welding thin sheets (<5 mm) in a constrained position. This welding wire is particularly suitable for galvanised materials. However, it is not recommended if the material is subject to heavy loads.
  
• Applications:
  - General purpose construction
  - metal frame
  - Shipyard
  - Mining
  - Construction and maintenance of agricultural equipment
  - Tanks, boilers
  
• Classification:
  AWS A5.20: E71T-GS
  EN ISO 17632-A: T 42 Z W N 1 H15

• Material: PE-HD
  
• Contents: 150 ml

• Gas-cooled
  
• Can be plugged in
  
• Load capacity for 60% duty ratio: 150 A for mixed gas, 180 A for CO2
  

• Gas-cooled
  
• Can be plugged in
  
• Load capacity for 60% duty ratio: 200 A for mixed gas, 230 A for CO2
  

• Gas-cooled
  
• Can be plugged in
  
• Load capacity for 60% duty ratio: 320 A for mixed gas, 340 A for CO2
  

• Water-cooled
  
• Can be plugged in
  
• Load capacity for 100% duty ratio: 350 A for mixed gas, 400 A for CO2
  

• Bristle material: Natural bristles

• For TIG welding of aluminium (AC)
  
• Length: 150 mm
  
• PU = 10 units

• For TIG welding of steel, stainless steel, aluminium (AC)
  
• Length: 150 mm, WR 2
  
• PU = 10 units

• For soldering copper pipes in cold and hot water installations according to DVGW working leaflet GW 2
  
• DIN EN 29453
  
• ø 2.7 mm