Solid wire filler metal for MIG welding of austenitic stainless steels without molybdenum of types 304, 304L, 321, 347. For all types of metal constructions at operating temperatures up to 350°C
Applications:
- For all types of metal constructions at operating temperatures up to 350°C
- General use with low corrosion
Classification:
- AWS 5.9 : ER 308L Si
- EN ISO 14343-A : G19 9 L Si

Multiple variants

Burner tube MIG/MAG GYS

Only a few items left in stock

Multiple variants

Hose Packet TBI 150

Immediately available

Gas-cooled
Can be plugged in
Load capacity for 60% duty ratio: 150 A for mixed gas, 180 A for CO2

Multiple variants

Hose Packet TBI 360

Immediately available

Gas-cooled
Can be plugged in
Load capacity for 60% duty ratio: 320 A for mixed gas, 340 A for CO2

Multiple variants

Hose Packet TBI 411

Immediately available

Water-cooled
Can be plugged in
Load capacity for 100% duty ratio: 350 A for mixed gas, 400 A for CO2

Multiple variants

MIG/MAG pliers for nozzles

Immediately available

Multiple variants

Safety bracket for bottle pressure controller

Immediately available

Links on the left
Colour: yellow Acetylene
Colour: blue Oxygen

Multiple variants

Electrode holder special

Immediately available

Fully insulated with glass-fibre reinforced hand tube for increased temperature loads
With brass lower part, malleable cast iron lever, black shell and cable lug connector

Multiple variants

Welding cable

Immediately available

With electrode holder
Made of plastic-coated copper cable
With cable plug

Multiple variants

Welding cable extensions

Immediately available

With cable connector
Made of plastic-coated copper cable
With cable plug

Multiple variants

Earthing lead with clamp

Immediately available

Made of plastic-coated copper cable
With cable plug and ground terminal with solid
insert connector
Plug with mandrel

Multiple variants

Gas nozzle Plus 15 for TBI 150

Immediately available

Compatible with burner shaft ø 12 mm
For inert gas burner with plug connection
Various opening diameters depending on application

Multiple variants

Gas nozzle Plus 25 for TBI 250

Immediately available

Compatible with burner shaft ø 15 mm
For inert gas burner with plug connection
Various opening diameters depending on application

Multiple variants

Gas nozzle Plus 36 for TBI 360

Immediately available

Compatible with burner shaft ø 20 mm
For inert gas burner with plug connection
Various opening diameters depending on application

Multiple variants

Current nozzles, series MD 5-x

Immediately available

Thread M 8
Bare copper
External thread

Multiple variants

Current nozzles, series MD 8-x

Immediately available

Thread M 6
Bare copper
External thread

Multiple variants

Current nozzles, series MD 9-x

Immediately available

Thread M 6
Bare copper
External thread

Multiple variants

Oxygen and acetylene hoses

Immediately available

Acetylene hose 9 x 3.5 mm and oxygen hose 6 x 5.0 mm
Pre-assembled at both ends with nozzle and union nut DN 8 (1/4“) right
and/or DN 10 (3/8“) left and dual hose clip

Multiple variants

Oxygen hose

Immediately available

Special quality pursuant to DIN 8541
With strong insert
Durable and flexible

Multiple variants

Acetylene hoses

Immediately available

Special quality pursuant to DIN 8541
With strong insert
Durable and flexible

Multiple variants

Flashback arrestor DGN

Immediately available

For securing tapping points (pressure reducer/thread)
Oxygen: DN 8 (1/4)”, right-hand connection, colour: blue
Acetylene/all-gas: DN 10 (3/8”), left-hand connection, colour: red

Multiple variants

Gas welding rods

Immediately available

For joint welding of non-alloy and low-alloy steels, copper-plated
Fluidity: GI-fluid/GII-less fluid/GIII-viscous
Welding spatter: GI-a lot/GII-a little/GIII-none

Multiple variants

Welder chalk

Immediately available

Size: 10 x 10 x 100 mm
Colour: natural

Multiple variants

Welding mirror

Immediately available

Made of polished stainless steel
For welding and inspecting difficult to access welds
With magnetic holder

80 001 26

High performance mix gas AT 3000

Immediately available

80 042 77

Burner tube holder with magnetic base for MIG/MAG torches

Immediately available

With magnetic foot

80 042 86

GYS wear parts box for MIG/MAG torches 150A

Immediately available

Consisting of:
- 5 contact tubes Ø 0.6 M6 steel / stainless steel
- 5 contact tubes Ø 0.8 M6 steel / stainless steel
- 5 contact tubes Ø 0.8 M6 aluminium (when Welding aluminium, it is necessary to replace the wire guide core with a Teflon core with order no.: 80 082 92)
- 3 nozzle holders 150 A
- 5 retaining springs
- 3 Gas nozzles 150 A

80 042 87

GYS wear parts box for MIG/MAG torches 250A

Immediately available

Consisting of:
- 5 contact tubes Ø 0.6 M6 steel / stainless steel
- 5 contact tubes Ø 0.8 M6 steel / stainless steel
- 5 contact tubes Ø 0.8 M6 aluminium (when Welding aluminium, it is necessary to replace the wire guide core with a Teflon core with order no.: 80 082 92)
- 3 nozzle holders 250 A
- 5 retaining springs
- 3 Gas nozzles 250 A

80 042 88

GYS wear parts box for MIG/MAG torches 350A

Immediately available

Consisting of:
- 5 contact tubes Ø 1.0 M8 steel / stainless steel
- 5 contact tubes Ø 1.2 M8 steel / stainless steel
- 5 contact tubes Ø 1.0 M8 aluminium (when Welding aluminium, it is necessary to replace the wire guide core with a Teflon core with order no.: 80 082 92)
- 5 contact tubes Ø 1.2 M8 aluminium (when Welding aluminium, the wire guide core must be replaced with a Teflon core with order no.: 80 082 92)
- 3 Gas distributor 350 A
- 2 Nozzle holder
- 3 Gas nozzles 350 A

80 043 15

Conversion kit for gas-free Welding Cored wire Ø 0.9 - 1.0 mm

Only a few items left in stock