Tool
- Area of application: Masonry, concrete and reinforced concrete
- Shank: SDS-Plus
- Design: 4-cutter with solid carbide head
- For pipe inspection up to 15 m
- Pipe inspection from inner ø 14 mm
- Inspection of ventilation pipes, drainage pipes, sewage pipes, etc.
- Power (watts): 2200
- Rated voltage (V): 230
- Idle speed (min-1): 6500
- Versatile measurements: frequency, continuity, resistance and capacitance with min/max/average value recording
- Protection class: IP 65
- Voltage testers up to 600 V AC/DC
- Set with 1 battery + Pressing jaws M contour 15-18-22
- For all standard pressfitting systems: ø 10-40 mm (metal fittings up to ø 35 mm)
- 270° rotatable pressing jaw holder for holding Compact Pressing jaws
- Idle speed (min-1): 13000
- Adjustable rpm: No
- Milling depth preselection: Yes
- Consisting of:
Cordless drill/screwdrivers, 18 V - Battery capacity (Ah): 2.0-12.0
- Torque (Nm) max.: 45
- PACKOUT compatible
- Impact wrench resistant
- Consisting of:
- Phillips: PH1/3x PH2/PH3, 25 mm
- Pozidriv: PZ1/3x PZ2/PZ3, 25 mm
- Torx®: 2xT10/T15/2xT20/2xT25/2xT30/2xT40, 25 mm
- Hexagon socket: 4/5, 25 mm
- Phillips: 2xPH2/PH3, 50 mm
- Pozidriv: 2xPZ2/PZ3, 50 mm
- Torx®:T10/T15/2x T20/2x T25/2x T30/2x T40, 50 mm
- Phillips: PH2, 90 mm
- Pozidriv: PZ2, 90 mm
- Torx®: T20/T25, 90 mm
- Magnetic bit holder: 60 mm
- Drills dia. (mm): 5/6/8
- Battery capacity (Ah): 2.0-12.0
- Idle stroke rate (min-1): 500-3500
- Lifting height (mm): 26
- Area of application: Soft and hard wood as well as OSB, MDF and blockboard
- Shank: Hexagon 7/16" Hex
- Consisting of:
- ø (mm): 35/38/54/65
- Voltage, resistance, capacitance measurement and continuity test in one device
- Display: LCD
- Voltage range AC: 6/60/600/1000V
- Idle speed (min-1): 0-1050
- Stroke rate (min-1): 0-4675
- Impact energy (joules): 1.5
- For Cuttering: Softwood, hardwood, plywood and coarse chipboard
- High-quality carbide teeth ensure clean and precise cuts
- Shank: 8 mm
- Shock-absorbing housing
- With display illumination
- Protection class: IP 54
- For Cuttering: Softwood, hardwood, plywood and coarse chipboard
- High-quality carbide teeth ensure clean and precise cuts
- Shank: 8 mm
- Reliable and robust true RMS fork current clamp with inverted LCD display for quick testing of Alternating currents
- Protection class: IP 54
- Voltage testers up to 1000 V AC/DC
- Tool holder: STARLOCK, STARLOCKPLUS
- Oscillating rpm (min-1): 20000
- Oscillation angle (°): 1.7
- Protection class: IP 55
- Infrared resolution: 256 x 192 pixels
- SuperResolution function (inpolation to 320 x 240 pixels): No
- Idle speed (min-1): 5000-10000
- Sanding disc diameter (mm): 150
- Velcro backing plate: Yes
- Area of application: For drilling holes in wood, MDF boards, plasterboard, sandwich materials, plastics, steel, stainless steel, non-ferrous metals, cast iron and aluminium
- Design: With 8% cobalt alloy
- Consisting of:
- Adapter for hole saws ø 14-30 mm with hexagon socket 9.5 mm
- Adapter for hole saws ø 32-152 mm with 11 mm hexagon holder
- 2 x Centring drills
- Hole saw dia. (mm): 20/25/32/35/40/44/51/54/68/76
- Transport case: PACKOUT™
- Efficient and robust true RMS current clamp meter with inverted LCD display for precise measured values
- Protection class: IP 54
- Voltage testers up to 600 V AC/DC
- Direct connection to Android and iOS Smartphone via USB-C
- Enables easy data transfer and immediate analysis on the mobile phone, detects temperature differences of 0.04°C
- Auto-rotation function automatically synchronises the screen with the recording direction
- High work efficiency thanks to 3 x 360° lines: simultaneous horizontal and vertical levelling work throughout the room with just one Tool
- Protection class: IP 65
- Laser class: 2
- Idle speed (min-1): 0-1050
- Stroke rate (min-1): 0-4675
- Impact energy (joules): 1.5
- Protection class: IP 54
- For detecting laser lines in unfavourable lighting conditions or at greater distances of up to 5 m
- Detection of green and red laser lines
- Torque (Nm) max.: 30
- Torque pre-selection: Yes
- Drill ø wood/steel (mm) max.: 19/10
- Screwdriver bits are made from heat-treated, S2-modified steel for hardness and wear resistance
- Bits in the Set are colour-coded to make it easier to find the right one
- CYL-3 Drills are made from a carbide blend that provides the strength and durability you need for drilling in concrete and natural stone
Consisting of:
- Material to be cut: steel and stainless steel
- Inner hole ø: 22.23 mm
- Robust aluminium oxide grains for long-lasting performance
- Area of application: Can be used for drilling holes in wood, drywall, building blocks, plastics, metals, non-ferrous metals, stainless steel, abrasive materials and soft tiles
- Design: Carbide with 20 times longer service life
- Consisting of:
- PowerChange/PowerChange Plus adapter with 11 mm hexagon socket
- Centring drill, ø 8.5 mm, length 105 mm, with hexagon holder 6.35 mm (1/4"), ø 7.15 mm, length 105 mm, with hexagon holder 6.35 mm (1/4")
- Hole saw dia. (mm): 22/25/35/40/51/68, length 60 mm
Bit sets consisting of:
- Device for checking the wiring of Plug sockets and the tripping of Earth-leakage circuit breakers
- Display: LCD
- Operating voltage: 30-260V,45-65Hz
- For checking solar panels and measuring the delivered power output before they are installed on the roof
- Display: OLED display, enables use even in strong sunlight
- Automatic MPPT detection
- Suitable for: Stainless steel
- Screwdriver bits are made from heat-treated, S2-modified steel for hardness and wear resistance
- Bits in the Set are colour coded to make it easier to find the right one
- Metal HSS Drills are made from high speed steel for the heat resistance you need when drilling into metal
Consisting of:
- Area of application: Masonry, concrete and reinforced concrete
- Shank: SDS-Plus
- Design: 4-cutter with solid carbide head
- Suitable for systems of all sizes
- Suitable for class A1, A2L, A2 and A3 refrigerants (e.g. R290)
- Maintenance-free operation thanks to oil-free 2-piston compressor
- Power (watts): 1400
- Rated voltage (V): 230
- Idle speed (min-1): 11000