Eltako
- Power: 16 A, 250 V/AC
- With manual override and switch position indicator
- Batteries and cable-free
- Single mounting with mounting plate (Screws or Adhesive)
- Fits into standard 55 Switch lines
- Division unit: 1
- Output: 16 A, 250 V/AC
- 1 NC contacts floating
- Protection type: IP44
- MID conformity
- Voltage: 230 V
- Division unit: 1
- Output: 16 A, 250 V/AC
- 1 NC contacts floating
- Output: 10 A, 250 V/AC
- Maximum device protection 16 A
- 1 change-over contact, floating
- Box-mounted devices
- For R, L and C loads up to 400 W, dimmable energy saving lamps ESL up to 100 W and dimmable 230 V LED lamps up to 100 W
- Ref. no.: EUD61NPN-UC
- Division units: 1
- Output: 10 A, 250 V/AC
- 1 floating change
- Division units: 1
- Output: 16 A, 250 V/AC
- Floating
- To compensate for inductive interference voltages on control lines
- This can be used to suppress up to three switching devices for the 230 V control inputs via a parallel connection
- Ref. no.: RC12-230 V
- Division units: 1
- Output: 10 A, 250 V/AC
- 2 NC contacts, floating
- Box-mounted devices
- For R, L and C loads up to 400 W
- Energy saving lamps ESL and 230 V LED lamps can not be switched with dimmers without N connection
- Division unit: 1
- For R, L and C loads up to 400 W, dimmable energy saving lamps ESL up to 100 W and dimmable 230 V LED lamps up to 100 W
- With nursery and sleep timer
- Internal or external control voltage of 12 to 24 V/UC
- Output: 10 A, 250 V/AC
- 1 NC contact, floating
- Wireless button F2T55E in pure white gloss
- Individual assembly with retaining plate (screw or glue)
- Suitable for standard 55 switch systems
- Division units: 1
- Output: 10 A, 250 V/AC
- 1 floating change
- MID-calibrated
- Maximum current 3 x 80 A
- Stand-by loss only 0.5 W per path
- Protection type: IP44
- MID conformity
- Voltage: 230/400 V
- Division units: 4
- No calibration
- Maximum current: 3 x 80 A
- For maintaining the base load (high standby loads may impair/prevent base load detection, e.g. fluorescent lamps, elec. transformers, dimmer switches)
- To be used in a consumer, switch or junction box directly
- Division units: 1
- Output: 16 A, 250 V/AC
- With an internal toroidal current transformer, the AC current flowing through a consumer from 0.1 A to max. 32 A is compared with the set value
- Division units: 1
- Output: 16 A, 250 V/AC
- 1 NC contact, not floating
- Power: 16 A, 250 V/AC
- Overrun 1 to 12 minutes
- Response delay 0 to 12 minutes
- Division units: 1
- Calibration: MID
- Maximum current: 32 A