LUNOS
New
98 010 65
Internal wall outlet ILD for Ø160 circular ducts, active overflow element for internal walls
Immediately available
- Active overflow element for internal wall air diffuser for fresh air supply in internal living spaces
- Retrofitting possible with round duct
- Additional ventilator for cascaded ventilation in a living space
98 029 04
Lunos Silvento replacement filter 2/FSI-R, PU = 3 pieces
Immediately available
- Suitable for single-pipe fan and Silvento ec clamp-in fan
- Dimensions (H x W): 191 x 166 mm
- PU = 3 units
98 028 86
Switch for universal control system Lunos, for e¦ and e go
Immediately available
- Cover for universal controller 5/UNI-FT and 5/UNI-RF
- For controlling up to 3 ventilation levels and/or for setting the summer ventilation
- Suitable for ego and e²/e²60
98 029 67
Control circuit board Basic, model 5/EC-ZI Overrun and interval 8 power levels
Immediately available
- The control board is located in the filter frame and is easily accessible after removing the front panel
- Numerous control functions are possible in combination with a Silvento ec fan unit and an ec clamp-in fan
- Seven ventilation levels: 0, 15, 20, 30, 40, 45, 50, 60 m³/h
98 028 91
Flush-mounted housing Lunos Silvento 3/UP-BR,outlet connection DN80 on side, w. fire protection
Currently not in stock
- Plastic housing with fire protection coating
- With K90-18017 shut-off device, suitable for installation in domestic kitchens
- Air leakage-proof check valve
98 028 77
Lunos external grille, Ø 175 mm, made of stainless steel, for e¦
Immediately available
- Suitable for e²/e²60 slot
- Push-fit stainless steel
- With insect protection
98 028 84
Comfort control system Lunos Touch Air for e¦und E go, incl. installation box
Currently not in stock
- Controller for all Lunos ventilation equipment
- Touch display with glass front
- Integrated moisture and temperature sensor
98 028 81
Lunos replacement filter, class G3 for e go, washable, PU = 4 pieces
Immediately available
- Suitable for KWL slot ego
- Filter class: G3
- Washable
98 028 87
Power supply for universal control system Lunos, input 230 VAC, output 12VDC
Immediately available
- Power supply for universal controller 5/UNI-FT, 5/UNI-RF und 5/SC-FT
- Input voltage: 230 V AC
- Output voltage: 12 V SELV
98 002 98
Power supply 60W Input 230V AC Output 12 V SC, For top-hat rail
Immediately available
- Power supply for universal controller 5/UNI-FT, 5/UNI-RF und 5/SC-FT
- Switching capacity up to 5 ego or 10 e²/ e²60 devices
- For rail mounting
98 002 99
Sound-proofed internal panel Colour: white, for Lunos e¦ and e¦neo
Immediately available
- Suitable for e² und e²60 slot
- For improving the acoustic pressure differential by up to 6 dB
- Incl. washable filter G2 und G3
98 028 96
Second-room set Lunos Silvento 3/S2 suitable for 3/UP-R and 3/UP-A
Immediately available
- For plug-in assembly of the second-room nozzle (DN 50/51/80), the pre-fabricated opening must be created on the flush-mounted housing at the predetermined breaking points.
- Distribution of the volume flow: 1st room 2/3 2nd room 1/3
98 028 75
Internal panel standard Lunos series 160, for e¦
Immediately available
- Suitable for e²/e²60 slot and ILD overcurrent element
- White plastic
- Dimensions (H x W x D): 180 x 180 x 35 mm
Multiple variants
External grille, plastic
Immediately available
- Suitable for e²/e²60 slot
- With claw fixing and insect protection
- Dimensions ø: 180 mm
98 028 89
Surface-mounted housing Lunos Silvento 3/AP-B, drain connection DN80, rear, with fire protection
Immediately available
- Suitable for wall and ceiling installation
- Air leak-proof non-return valve
- With fire protection coating
98 005 06
KWL decentralised e²60 slide-in unit for living areas
Immediately available
- The e2 models work on the principle of regenerative heat exchangers. The storage stone sits in the centre of the air flow of an EC axial fan. The plastic (PLA) is charged with thermal energy from the room air by a reversing air flow, which is created by a targeted change in direction of the fan, and releases it back into the incoming outside air. This happens so efficiently that up to 96% of the heat energy contained in the air is recovered. The combination of e² and ego ensures one hundred per cent ventilation and Deaerators with heat recovery throughout the house and is ideal for KFW houses.
Area of application: - For living spaces without odour pollution
- Living room
- Bedrooms
- Common rooms
Technical data: - Voltage: 12 V SELV
98 029 66
Clamping fan Silvento ec Model KL-EC
Immediately available
- The power consumption can be significantly reduced thanks to the ec technology. The Silvento ec is also quieter than its predecessor, as it is considerably more efficient and can be operated with a reduced volume flow.
The functions of the Silvento ec can be selected via two control boards (not included):
Basic board (order no. 98 029 67): 7 adjustable ventilation levels between 15 and 60 m³/h, overrun, interval switching and switch-on delay
Comfort board (order no. 98 029 68): Same function as the basic board, but with moisture and temperature sensor.
Both boards can also be retrofitted with a plug-in motion sensor.
The Silvento ec is available in 2 versions.
Version 1: As fan insert combined with Lunos flush-mounted housing
Version 2: Clamp-in fan for direct mounting in drywall panel cut-outs - For direct mounting in drywalls or ceilings
- No flush-mounted housing required
Technical data:
98 028 93
Flush-mounted housing Lunos Silvento 3/UP-BA,outlet connection DN80,at back, w. fire protection
Only a few items left in stock
- Plastic housing with fire protection coating
- With K90-18017 shut-off device, suitable for installation in domestic kitchens
- Air leakage-proof check valve
98 008 99
Replacement filter LUNOS 9/FIB-R, ISO Coarse ≥ 45%, Ø160mm, PU=3 pcs.
Immediately available
- Suitable for Lunos e² and e²60 and all devices in the LUNOS 160 Series
- Filter class: ISO Coarse ≥ 45%
- PU = 2 pieces
98 028 82
Pollen filter Lunos for e go, PU = 4 units
Immediately available
- Suitable for KWL slot ego
- Can be used instead of the standard filter
- Dimensions (W x H): 70 x 140 mm
98 028 83
Sound insulation set Lunos for e¦, increase external sound insulation
Immediately available
- To increase external sound proofing
- Suitable for e² und e²60 slot
- Can be shortened in any way
98 003 77
Comfort inner cover, white plastic, for e²
Immediately available
- Design panel with gloss stripe decor
- Suitable for e²60 + e² slot
- White plastic
98 002 96
Wall installation housing made of EPS polystyrene for round ducts, diam: 160mm
Immediately available
- Suitable for KWL e²/e²60 and ego
- For exact installation, even during the shell phase
- In conjunction with installation sleeve 160 (not included)
Multiple variants
External hood, sound-proofed
Immediately available
- For increased soundproofing requirements (e.g. on busy streets, rail traffic)
- Suitable for e²60 slot
- Dimensions (H x W x D): 235 x 205 x 72 mm
98 010 64
Universal control 5/UNI-RF with integrated radio module for e2, ego, with humidity and temperature sensor
Immediately available
- Controls for switching the various operating modes of the radio shutters 9/IBF-RF
- Integrated Humidity and temperature sensor
- Summer mode: night cooling without heat recovery
98 010 62
Radio panel Comfort 9/IBF-RF, incl. control with integrated radio module, power supply unit for e²+e²60
Only a few items left in stock
- Design indoor panel for wireless communication between an unlimited number of e² or e²60 Series Fan units
- The sensor system records the indoor parameters, humidity and temperature of the outside air and automatically adjusts the volume flows
- Time delay 15min or 30min
Multiple variants
External hood, sound-proofed Lunos e²
Immediately available
- For increased soundproofing requirements (e.g. on busy streets, rail traffic)
- Suitable for e²60 slot
- Dimensions (H x W x D): 235 x 205 x 72 mm
Multiple variants
Two-channel external hood, sound-proofed
Immediately available
- For increased soundproofing requirements (e.g. on busy streets, rail traffic)
- Suitable for ego slot
- Aluminium
98 029 68
Control circuit board Comfort Model 5/EC-FK Moisture and temperature sensor
Immediately available
- The control board is located in the filter frame and is easily accessible after removing the front panel
- Numerous control functions are possible in combination with a Silvento ec fan unit and an ec clamp-in fan
- Seven ventilation levels: 0, 15, 20, 30, 40, 45, 50, 60 m³/h
98 028 79
Lunos replacement filter, class G3 for e¦, washable, PU = 3 pieces
Replacement item available
- Suitable for KWL slot e² + e²60
- Filter class: G3
- Washable
98 028 88
Surface-mounted housing Lunos Silvento 3/AP, drain connection DN80 at the rear
Immediately available
- Suitable for wall and ceiling installation
- Air leak-proof non-return valve
- No fire protection coating
Multiple variants
Silvento ec blower unit for flush-mounted housing (V = up to 60 m³/h)
Immediately available
- The power consumption can be significantly reduced thanks to the ec technology. The Silvento ec is also quieter than its predecessor, as it is considerably more efficient and can be operated with a reduced volume flow.
The functions of the Silvento ec can be selected via two control boards (not included):
Basic board (order no. 98 029 67): 7 adjustable ventilation levels between 15 and 60 m³/h, overrun, interval switching and switch-on delay
Comfort board (order no. 98 029 68): Same function as the basic board, but with moisture and temperature sensor.
Both boards can also be retrofitted with a plug-in motion sensor.
The Silvento ec is available in 2 versions.
Version 1: As fan insert combined with Lunos flush-mounted housing
Version 2: Clamp-in fan for direct mounting in drywall panel cut-outs
Technical data: - Design: Radial
- Extracted volume: 15/20/30/40/45/50/60 m³/h
Multiple variants
Installation wall spacer 160
Immediately available
- Required for ego und e²60 slots
- Material: PE
- Dimensions: ø 160 mm
98 029 64
Universal control 5/UNI-FT with moisture, temperature and overrun module for e go and e¦
Immediately available
- Controls for switching the various operating modes of the e², e²60 and ego Fan units
- Integrated Humidity and temperature sensor
- Summer mode: night cooling without heat recovery
98 003 78
Flush-mounted housing LUNOS Silvento 3/UP,exhaust air connection DN80
Immediately available
- Compatible with all Silvento single-pipe fans
- Exhaust vent: conical 75/80
- Air leak-proof non-return valve
98 029 61
KWL plug-in fan unit Lunos e go for functional spaces
Immediately available
- The ego is a heat recovery device that is primarily intended for functional rooms, such as bathrooms and kitchens. Paired operation is not necessary, as the ego autonomously ensures supply and exhaust air with heat recovery. At peak times, in the evenings for instance, it also has an exhaust air mode for rapid extraction of odours and moisture. The ego features two fans that are constantly working in opposite directions, and guarantee simultaneous supply and exhaust air. The storage brick sits in the middle of the air flow of two EC motors. Thanks to the reversing air flow generated by the targeted directional change of the fans, the ceramic becomes charged with the heat energy from the ambient air, and emits it into the outside air.
Area of application - For functional rooms such as
- bathroom
- kitchen
- WC
Technical data: - Extracted volume:
- Basic ventilation 5 m³/h
- Demand ventilation 10 m³/h
- Intensive ventilation 20 m³/h
- Exhaust air mode 45 m³/h