Stiebel Eltron

• The Safety groups for surface mounting of closed wall-mounted storage tanks and small pressurised storage tanks can be mounted horizontally or vertically
  
• Safety valves 6 bar

Technical data:

• - Weather protection for the hydraulic connection lines of the heat pump
  
• Length adjustable from 190–400 mm
  
• Made of corrosion-resistant galvanised steel
  

• For heat pump connection
  The WPKI 5-I heat pump compact installation contains all the necessary components for water-side connection of the heating heat pump to the buffer storage units 200/ 400/ 700/ 700 SOL, such as safety valve, thermomanometer, shut-off valves, non-return valve and a connection option for an expansion tank.
  Technical data:
  
• Max. operating pressure: 0.3 Mpa
  
• Heating safety valve: 0.3 Mpa
  

• PT 1000 sensor in weather-resistant plastic housing
  
• For surface mounting

- For convenient operation of the comfort instantaneous water heaters- Suitable for: DHE, DEL Plus, DHB-E LCD- Large LC display- Infinitely variable temperature setting from 20°C to 60°C- For initial fitting- Incl. wireless adapter and wall bracket ...

• Contact thermostat for limiting the maximum permitted flow temperature
  
• Temperature setting range: 20-90°C
  
• Protection type: IP30
  

- For converting a standard appliance to an under-counter appliance- With surface-mounted water connections G 3/8" at the top for copper pipe (10 mm)- Is integrated into the rear panel of the appliance ...

• Hot drinking water cylinder for heat pump operation
  
• Foam-insulated enamelled steel cylinder
  
• With magnesium signal anode
  

• Suitable for air, water Heat pumps, 15/25 AC(S) series
  
• Consisting of:
  - 2 x angled connection pipe with transition, DN 32 (1 1/4 ") x 28 mm
  - 1 x Cover hood, 390 x 290 x 300 mm
  

• Water heating from 0.2 to 5 litres
  
• Temperature range can be adjusted steplessly from approx. 35°C to boiling
  
• Durable: radiator outside the water / under the base plate
  

• - For heat pumps with integrated heating circulation pump
  - Simple connection of a heating heat pump to buffer tank 200-700 litres
  Technical data:
  
• Max. operating pressure: 3.0 bar
  
• Connection thread: DN 32 (11/4”) flat sealing

• - Electrical distribution strip for switching between heating and cooling in panel heating systems
  - Connection for six 230 V actuator possible
  - Cascading possible for additional heating circuits
  
• For mounting on top-hat rail
  Technical data:
  
• Operating voltage: 230/50 AC V/Hz
  

• Combination appliance consisting of domestic hot water cylinder with a heat exchanger and Buffer tank
  
• System storage tank for integration in externally installed Heat pumps for domestic hot water preparation and space heating
  
• Additional corrosion protection through magnesium anodes
  

• Top connection: DN 25 (1") FEMALE THREAD
  
• Bottom connection: DN 40 (1 1/2"), flat-sealing
  
• Discharge head: 6 m
  

• - Room remote control with thermostat function for the heat pump manager WPM
  - Data coupling via the system bus
  
• Suitable for each of the 5 heating circuits of the WPM system
  
• Illuminated graphic display
  - Display of time, room temperature and humidity as well as outside temperature
  

• Suitable for: WPL 20 A, WPL 25 A
  
• For mounting the air/water Heat pumps on masonry
  
• Made from corrosion-resistant galvanised steel
  

• With an additional heat exchanger/heat exchanger for integrating a solar thermal system
  
• For hydraulic decoupling of Heat pumps and heating circuit
  
• Directly foamed steel tank
  

• Top connection: DN 25 (1”) IT
  
• Bottom connection:
• DN 40 (1 1/2”) flat-sealing
  

• This allows a three-phase comfort instantaneous water heater with a connected load of 11-13 kW to be connected to a cooker connection socket
  
• Integrated priority circuit that interrupts the power supply to the electric cooker while hot water is being tapped
  
• Compatible with electric cookers without electronics, clock and residual heat indicator
  

• Suitable for: WPL ACS Classic
  
• For mounting the air/water Heat pumps on masonry
  
• Made from corrosion-resistant galvanised steel
  

Consisting of:1 x air-water heat pump WPL 17 ACS classic compact plus set 1.1 (90 090 48)1 x stand bracket SK2 (90 090 49)1 x safety temperature controller STB-FB (90 090 50) 1 x storage tank safety group ZH 1 (90 090 51) ...

• Highly efficient drinking water circulation pump with automatic venting mode
  
• Suitable for detached houses and apartment blocks
  
• Operation optionally via control thermostat and/or Timer switches
  

• The main controller of the new, expandable WPMsystem
  
• For two mixed and one unmixed heating circuit
  
• Two Heat pumps can be operated in cascade
  

• Hot drinking water cylinder for heat pump operation
  
• Foam-insulated enamelled steel cylinder
  
• With magnesium signal anode
  

• - Suitable for all Heating and air conditioning applications
  Technical data:
  
• Mains connection: 230/50 V/Hz
  
• Connection:

- For convenient operation of the comfort instantaneous water heaters- Suitable for: DHE, DEL Plus, DHB-E LCD- Large LC display- Infinitely variable temperature setting from 20°C to 60°C- As a second or additional radio remote control- Without radio adapter ...

• Safety group for free-standing electric and combi cylinders up to 1000 l
  
• With integrated backflow preventer
  Technical data:
  
• Safety valve response pressure: 6 bar
  

- This allows a three-phase compact instantaneous water heater with 11-13 kW to be connected to a cooker connection socket- Integrated priority circuit that interrupts the power supply to the electric cooker while hot water is being tapped- Compatible with electric cookers without electronics, clock ...

• Suitable for: WPL ACS Classic, WPL 20 A, WPL 25 A
  
• For setting in concrete
  
• Stainless steel bracket in T-shape
  

Technical data:

• Compact drinking water storage tank with a heat exchanger
  
• System storage tank for integration into externally installed Heat pumps for domestic hot water preparation
  
• Additional corrosion protection through magnesium anodes
  

• With additional heat exchanger (1.3 m²) for bivalent operation
  
• Compact series for recirculating air operation
  
• Hygienic hot water temperatures up to 65°C achievable in efficient heat pump operation
  

• For hot water supply
  The hot water supply kit includes the components required to extend the water-side connection of the heat pump to the hot water tank.
  The circulating pump must be chosen in accordance with the system and retrofitted.
  Not suitable for heat pumps with integrated heating circulation pumps.
  Technical data:
  
• Max. operating pressure: 3 bar
  
• Connection:

• Suitable for HSBC 300 cool:
  - For diverting the connections on the drinking water side from the top to the rear of the storage tank

• Suitable for: WPL ACS classic
  
• For mounting on strip foundation
  
• Colour: white (powder-coated)