Order Number: 90 400 87

Clamping screw connection 12 x 1.3 for wall heating, individual

Short description

The wall heating is an alternative or supplement to underfloor heating. It is a plaster system with clamping rail for mounting on solid walls (e.g. brick, concrete or sand-lime brick). The wall heating that is to be set up of site is plastered in with a pipe covering of roughly 15 mm (single-layer plaster structure for gypsum plaster). Cement-bound and clay plasters are processed with two layers and left to dry in accordance with manufacturer’s instructions, also with a pipe covering of roughly 15 mm. To prevent crack formation, a reinforcement fabric is embedded. The heating pipe to be used is an oxygen-tight polybutene pipe in accordance with DIN 4726 (12 x 1.3 mm) that is laid individually at various height and width dimensions (up to max. 6 m²). The pipe is connected directly to the distributor (with no collector lines) with compression fittings.
For connecting the PB heating pipe to the system manifold, Eurocone
PU = 1 unit