Surface seals and joint connections

- 1-component sealant based on hybrid polymer SMP- Mould-resistant (microorganisms DIN ISO 846)- Very good primerless adhesion to numerous substrates, even when exposed to water- Very high mechanical strength, notch resistance and tear propagation resistance- For stress-compensating seals and dynami ...

• Fast curing
  
• Final strength after approx. 12 hours
  
• Temperature resistance: -55°C to +150°C
  

• Difficult to dismantle
  
• Final strength after approx. 24 hours
  
• Temperature resistance: -55°C to +200°C
  

• Medium strength
  
• No finishing of the surfaces necessary
  
• Resistant to high pressures after curing
  

• Low strength
  
• Gap up to max. 1 mm
  
• An elastic silicone seal
  

• Final strength in 6 - 24 hours
  
• Temperature resistance: -55°C to +150°C
  
• Max. gap [mm]: 0.5
  

• High-strength
  
• Up to 0.15 mm bond gap
  
• Bridging of the play clearance prevents fretting corrosion
  

• Medium to high strength
  
• Gap up to max. 0.20 mm
  
• For Adhesive bonding of cylindrical joining parts, fastening dowel pins in radiators, sliding bushes in pump housings and bearings in gearboxes
  

• One-component hybrid sealant that reacts with atmospheric moisture with virtually no shrinkage and absolutely bubble-free
  
• High stretchability
  
• For a wide variety of substrates, also for moist
  

• Final strength in 6 - 24 hours
  
• Temperature resistance: -55°C to +150°C
  
• Max. gap [mm]: 0.3
  

• Medium strength
  
• Gap up to max. 0.25 mm
  
• Viscosity [mPa-s] at 25°C: 11,000-32,000
  

• For surface preparation before application of Loctite® adhesives and sealants below 5°C
  
• Solvent-free
  
• Accelerates curing on passive surfaces such as stainless steel, aluminium or passive metals
  

- For sealing and bonding plastics and metals in industry.- Skin forming time: 10 - 20 min.- Temperature resistant: -50 °C to +80 °C- Tensile strength: 0.9 MPa- Shore hardness A 30- Good UV resistance- Good adhesion- Excellent UV and weather resistance- Free of solvents, isocyanates, silicones and ...

• High-strength
  
• Gap up to 0.25 mm
  
• Bridging of the play clearance prevents fretting corrosion
  

• High strength
  
• Gap up to max. 0.15 mm
  
• For Adhesive bonding of cylindrical parts and for fastening bearings
  

• High-strength
  
• Up to 0.15 mm bond gap
  
• Bridging of the play clearance prevents fretting corrosion
  

• High strength
  
• Gap up to max. 0.50 mm
  
• Quick metal with very high gap filling capacity
  

• Medium strength
  
• No finishing of the surfaces necessary
  
• Resistant to high pressures after curing
  

• - Surface treatment of materials that are difficult to bond such as polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic elastomers
  - Not for joints where high peel strength is required
  
• Contents: 10 g

• For faster curing of anaerobic adhesives and sealants
  
• For passive surfaces, large gap widths and low ambient temperatures (around 0°C)

• High-strength
  
• Up to 0.15 mm bond gap
  
• Bridging of the play clearance prevents fretting corrosion
  

• Low strength
  
• Gap up to max. 1 mm
  
• An elastic silicone seal