GOK: LPG tank regulators and hose assemblies

• Can only be used for exterior mounting downstream of a
  pre-stage controller with SAV value = 2.0 bar
  
• Consisting of: Insulating piece, shut-off valve,
  gas filter insert, isolating screw connections,
  low pressure controller12 kg/h with safety shut-off
  valve OPSO (SAV) and safety blow-off valve PRV,
  Two junction pieces for soldering connection
  and hot-dip galvanised protective box
  (H x W x D: 460 x 310 x 155 to 215 mm)
  
• Output: 12 kg/h
  

• Incl. seal
  
• Material: Brass
  

• Connection RVS 18 mm, DN 20 PS 16 bar
  
• Surface mounting
  
• Consisting of: Insulating piece, main shut-off valve, test connection, hot-dip galvanised protection box (H x W x T: 328 x 210 x 125 mm)
  
  

• For direct connection to LPG tanks
  
• Input: POL connection
  
• Output:
  Cutting-ring connection RVS 15 mm, 0.7 bar
  with OPSO (SAV) safety shut-off valve
  and safety blow-off valve PRV
  

• For direct connection to gas containers
  
• Input: POL connection
  
• Output: Cutting-ring connection RVS 15 mm with safety shut-off valve OPSO (SAV) and safety blow-off valve PRV
  

• For direct connection to LPG tanks
  
• Input: POL connection
  
• Output:
  Cutting-ring connection RVS 15 mm, 0.7 bar
  with OPSO (SAV) safety shut-off valve and
  safety blow-off valve PRV
  

• For large bottle controller
  
• DN 15 (G 1/2”) LH - ÜM x RVS 12
  
• Suitable for order no. 58 001 12
  

• For direct connection to LPG tanks
  
• Output: 12 kg/h
  
• Input: POL connection
  

• Fixed for internal mounting in conjunction with an intermediate pre-stage controller (58 004 28)
  
• With safety shut-off valve OPSO (SAV) and additional safety diaphragm, as a result of this, the safety blow-off valve PRV is no longer needed and it is not required to discharge the overpressure into the atmosphere!
  
• With thermal shut-off device
  for automatic shut-off of the
  gas flow
  when the temperature rises above 100°C
  

• A union nut on one side,
  a cutting-ring connection on the other
  
• DN 8 (1/4") LH - union nut x RVS 8
  
• Resistant to temperatures down to -30°C
  

*LB = large bottle connection ...

• With safety shut-off valve OPSO (SAV) for connection
  to LPG bottles 33 kg
  
• With safety blow-off valve PRV
  
• With testing connection
  

• With safety shut-off valve OPSO (SAV) for connection
  to LPG bottles 33 kg
  
• With safety blow-off valve PRV
  
• With testing connection
  

• With insulation piece
  
• With shut-off valve
  
• Thermal shut-off device “T” (TAE) for automatic shut-off of the gas flow in the event of a rise in temperature to over +100°C
  

• With height-adjustable support device for angled position
  
• With safety shut-off valve OPSO (SAV)
  
• With safety blow-off valve PRV
  

• For connecting fittings,
  pipes to compression fittings
  
• Connections:
  DN 8 (G 1/4“) LH union nut x pipe support 8 mm
  
• Resistant to temperatures down to -30°C
  

• Hose breakage protection devices prevent excess gas from escaping in the event of damage or hose loosening and close up the passage of gas as soon as the prescribed operating quantity is exceeded max. 10% above the nominal flow rate.
  Fitted between controller and hose. Commercial for hoses >400 mm and private >1500 mm. Exclusively for outdoor use.
  
• For trade and industry
  
• Input: DN 10 (G 3/8”) LH-union nut
  

• For connecting fittings, controllers
  with hoses or pipelines

• Both sides Union nut
  
• L series
  
• With steel cutting ring
  

• From cutting-ring screw connection
  to copper pipe soldering connection

• Both sides DN 8 (1/4") LH - union nut
  
• Resistant to temperatures down to -30°C
  
• PS 10 bar
  

• For connecting valves, consumer devices and pipes
  
• Connections: DN 8 (G 1/4“) LH union nut x plug-in nozzle
  
• Resistant to temperatures down to -30°C
  

• For liquid gas systems to connect a single-pipe gas meter DN 25 (1”)
  
• Connection rotatable through 180°
  
• Meter connection: ET 2 RH flat sealing, with sealing hole,
  pipe connection with pipe screw connection in 18 mm
  

• For liquid gas systems to connect a single-pipe gas meter DN 25 (1”)
  
• Connection rotatable through 180°
  
• Meter connection: ET 2 RH flat sealing, with sealing hole,
  pipe connection with pipe screw connection in 18 mm
  

• Hose breakage protection devices prevent excess gas from escaping in the event of damage or hose loosening and close up the passage of gas as soon as the prescribed operating quantity is exceeded max. 10% above the nominal flow rate.
  Fitted between controller and hose. Commercial for hoses >400 mm and private >1500 mm. Exclusively for outdoor use.
  A small amount of gas provides pressure equalisation, causing the hose breakage protection to
  open automatically.
  
• Nominal flow rate: 1.5 kg/h
  
• DN 8 (G ¼) LH union nut x DN 8 (G ¼) LH-KN
  

• Connection: ÜM M 10 x 1L, LH-ÜM R 3/8” L
  
• PS 30 bar
  
• DIN DVGW tested

• Operating pressure: 15 - 100 mbar
  
• Pressure loss: ≤ 0.5 mbar
  
• Overflow rate: 2 - 30 l/h air
  

• Operating pressure: 15 - 100 mbar
  
• Pressure loss: ≤ 0.5 mbar
  
• Overflow rate: 2 - 30 l/h air